Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

W203 EZS (Box) HC08 help digiprog3
02-06-2014, 14:10 PM,
Post: #1
W203 EZS (Box) HC08 help digiprog3
Hallo!

Help me how to write digiprog 3 W203 ezs(box) with hc08
init failed sadsmile2
please help how to write, and good pin
Thank you all
Quote this message in a reply
02-06-2014, 14:53 PM, (This post was last modified: 02-06-2014, 14:54 PM by volavka.)
Post: #2
RE: W203 EZS (Box) HC08 help digiprog3
(02-06-2014, 14:10 PM)djdanny Wrote:  Hallo!

Help me how to write digiprog 3 W203 ezs(box) with hc08
init failed
please help how to write, and good pin
Thank you all

AFAIK The digiprogIII Cannot Read it
Anyway u can read This Kind mcu by R270 in Circuit nod
Also u can use Xprog if u know SS secret
Regards

BEST CHIPTUNING SERVICE BY Zenter Performance  [Image: congrats.gif]

Contact Skype: zenter-88 
Facebook: https://www.facebook.com/ZenterPerformance
--------------------------------------------------------------------------------------------------------------

highest Quality ChiPTuninG Files BY PTF Team https://performance-tuningfiles.com/
POWER BY TECHNOLOGY drive

--------------------------------------------------------------------------------------------------------------
BEST CHIPTUNING SERVICE BY Jurebv   [Image: yes.gif]
Contact Skype: live:jure.coric_1
https://files.tuning-makarska.com/
--------------------------------------------------------------------------------------------------------------
-
IMMO/ECU , ODO , AIRBAG , CARRADIO , TESTED SOLUTIONS UNDER MY SOFTWARE   
In progress TUNING STAGE1/DPF/SCR/EGR/TVA/FLAP/ START STOP OFF Software 

WHAT'S NEWS !
-Steering Angle Sensor Restore For LEXUS,TOYOTA,SUBARU,MITSUBISHI,VAG 
-Citroen DS5 Steering lock Renew/Write Code by dumps
-Passat CCM Repair corrupted dump succes
-VAG ECU SIMOS PCR 2.1 KM WITH CRC CORRECTED !
-IMMO OFF For NISSAN/INIFINITI with HITACHI ECU | CPU SH705X
-Dacia Dashboard with Fujitsu MB96F6A6 Change km/Block Synchro Dash-ABS


-=[Full WinOLS/ECM Titanium User] =-

Remember!  dirty hands  are a sign of clean money 

шшш.αήkαbôôτ.Ćô.цk
Visit this user's website
Quote this message in a reply
[+] 2 users say Thank You to volavka for this post
02-06-2014, 15:05 PM,
Post: #3
RE: W203 EZS (Box) HC08 help digiprog3
Not read r270 sad
Quote this message in a reply
02-06-2014, 15:38 PM, (This post was last modified: 02-06-2014, 15:39 PM by volavka.)
Post: #4
RE: W203 EZS (Box) HC08 help digiprog3
(02-06-2014, 15:05 PM)djdanny Wrote:  Not read r270 sad

are u sure ? fail
maybe u using Wrong Pinout m8 thinking ,

r270 should work m8 Try With This Pinout under
Good Luck wink2


Attached Files Thumbnail(s)
   

BEST CHIPTUNING SERVICE BY Zenter Performance  [Image: congrats.gif]

Contact Skype: zenter-88 
Facebook: https://www.facebook.com/ZenterPerformance
--------------------------------------------------------------------------------------------------------------

highest Quality ChiPTuninG Files BY PTF Team https://performance-tuningfiles.com/
POWER BY TECHNOLOGY drive

--------------------------------------------------------------------------------------------------------------
BEST CHIPTUNING SERVICE BY Jurebv   [Image: yes.gif]
Contact Skype: live:jure.coric_1
https://files.tuning-makarska.com/
--------------------------------------------------------------------------------------------------------------
-
IMMO/ECU , ODO , AIRBAG , CARRADIO , TESTED SOLUTIONS UNDER MY SOFTWARE   
In progress TUNING STAGE1/DPF/SCR/EGR/TVA/FLAP/ START STOP OFF Software 

WHAT'S NEWS !
-Steering Angle Sensor Restore For LEXUS,TOYOTA,SUBARU,MITSUBISHI,VAG 
-Citroen DS5 Steering lock Renew/Write Code by dumps
-Passat CCM Repair corrupted dump succes
-VAG ECU SIMOS PCR 2.1 KM WITH CRC CORRECTED !
-IMMO OFF For NISSAN/INIFINITI with HITACHI ECU | CPU SH705X
-Dacia Dashboard with Fujitsu MB96F6A6 Change km/Block Synchro Dash-ABS


-=[Full WinOLS/ECM Titanium User] =-

Remember!  dirty hands  are a sign of clean money 

шшш.αήkαbôôτ.Ćô.цk
Visit this user's website
Quote this message in a reply
[+] 6 users say Thank You to volavka for this post
02-06-2014, 15:51 PM,
Post: #5
RE: W203 EZS (Box) HC08 help digiprog3
(02-06-2014, 15:38 PM)volavka Wrote:  
(02-06-2014, 15:05 PM)djdanny Wrote:  Not read r270 sad

are u sure ? fail
maybe u using Wrong Pinout m8 thinking ,

r270 should work m8 Try With This Pinout under
Good Luck wink2

i try not read sad
Quote this message in a reply
03-06-2014, 00:59 AM,
Post: #6
RE: W203 EZS (Box) HC08 help digiprog3
I read every day with R270.
Quote this message in a reply
03-06-2014, 04:59 AM,
Post: #7
RE: W203 EZS (Box) HC08 help digiprog3
Yes, R270 is very useful tool nod

»» Always use ---> [Image: postbit_reputation.gif] and  [Image: tyl_add.png]--->  if my post was helpful... ««
 
 
Quote this message in a reply
04-10-2014, 06:30 AM,
Post: #8
RE: W203 EZS (Box) HC08 help digiprog3
(02-06-2014, 14:53 PM)volavka Wrote:  
(02-06-2014, 14:10 PM)djdanny Wrote:  Hallo!

Help me how to write digiprog 3 W203 ezs(box) with hc08
init failed
please help how to write, and good pin
Thank you all

AFAIK The digiprogIII Cannot Read it
Anyway u can read This Kind mcu by R270 in Circuit nod
Also u can use Xprog if u know SS secret
Regards

My Digiprog read this MCU without problem, just use PDF help file for Digiprog.
Quote this message in a reply
04-10-2014, 09:02 AM,
Post: #9
RE: W203 EZS (Box) HC08 help digiprog3
(04-10-2014, 06:30 AM)doslamer Wrote:  My Digiprog read this MCU without problem, just use PDF help file for Digiprog.

Are you sure ? itwasntmeitwasntme

»» Always use ---> [Image: postbit_reputation.gif] and  [Image: tyl_add.png]--->  if my post was helpful... ««
 
 
Quote this message in a reply
04-10-2014, 15:50 PM, (This post was last modified: 04-10-2014, 15:51 PM by volavka.)
Post: #10
RE: W203 EZS (Box) HC08 help digiprog3
(04-10-2014, 09:02 AM)daxxer Wrote:  Are you sure ? itwasntmeitwasntme

maybe his digiprog coming from the moon rolling

(04-10-2014, 06:30 AM)doslamer Wrote:  My Digiprog read this MCU without problem, just use PDF help file for Digiprog.


stop Bullshit digiprog clone does not support hc08 shake

BEST CHIPTUNING SERVICE BY Zenter Performance  [Image: congrats.gif]

Contact Skype: zenter-88 
Facebook: https://www.facebook.com/ZenterPerformance
--------------------------------------------------------------------------------------------------------------

highest Quality ChiPTuninG Files BY PTF Team https://performance-tuningfiles.com/
POWER BY TECHNOLOGY drive

--------------------------------------------------------------------------------------------------------------
BEST CHIPTUNING SERVICE BY Jurebv   [Image: yes.gif]
Contact Skype: live:jure.coric_1
https://files.tuning-makarska.com/
--------------------------------------------------------------------------------------------------------------
-
IMMO/ECU , ODO , AIRBAG , CARRADIO , TESTED SOLUTIONS UNDER MY SOFTWARE   
In progress TUNING STAGE1/DPF/SCR/EGR/TVA/FLAP/ START STOP OFF Software 

WHAT'S NEWS !
-Steering Angle Sensor Restore For LEXUS,TOYOTA,SUBARU,MITSUBISHI,VAG 
-Citroen DS5 Steering lock Renew/Write Code by dumps
-Passat CCM Repair corrupted dump succes
-VAG ECU SIMOS PCR 2.1 KM WITH CRC CORRECTED !
-IMMO OFF For NISSAN/INIFINITI with HITACHI ECU | CPU SH705X
-Dacia Dashboard with Fujitsu MB96F6A6 Change km/Block Synchro Dash-ABS


-=[Full WinOLS/ECM Titanium User] =-

Remember!  dirty hands  are a sign of clean money 

шшш.αήkαbôôτ.Ćô.цk
Visit this user's website
Quote this message in a reply
[+] 4 users say Thank You to volavka for this post


Possibly Related Threads…
Thread Author Replies Views Last Post
YTMercedes Mercedes w203 dash swap SamRib 4 219 06-02-2024, 12:45 PM
Last Post: toutou_gsm
  cl w203 93lc86 eprom Nightless 0 154 08-10-2023, 15:03 PM
Last Post: Nightless
  Solved ✔ Benz W203 dash renew MahoJohn 1 420 09-05-2023, 17:01 PM
Last Post: MahoJohn
  Reset km ezs mercedes w203 2002 1j35d Gabriel87 1 517 26-02-2022, 11:39 AM
Last Post: Clusters
PCitroen Digiprog3 citroen c5 x7 2011 93c76 krol77 1 795 06-04-2019, 09:20 AM
Last Post: tpetrov
YTMercedes W203 all software version ssid dump locations zgjana 4 2,148 23-06-2018, 19:00 PM
Last Post: pietje001
  Das w203 ezs 209 dasdiagnosis 0 590 17-05-2018, 11:34 AM
Last Post: dasdiagnosis
0Dash Digiprog3 ftdi 232bm piotr37 1 956 24-03-2018, 23:24 PM
Last Post: Clusters
  HC08 Flash 8.2.0 HL zix1 19 5,230 04-02-2018, 22:34 PM
Last Post: zix1
  HC08 7.9.2 HL Flash need! zix1 0 761 30-01-2018, 18:42 PM
Last Post: zix1

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content