[unlocker]

Hello. Please help. I have corsa d 1.3cdti, 2013 year, 95 hp, ecu 17c59, I have problem with dpf, when connect with diagnostic tool egt sensor reading is 0,04 V, and temperature -0,41 celsius, I tried to connect other sensor and same value reading, if i disconnect dpf temp sensor, ecu stored fault. Car come with cloged dpf,  I clean dpf, inspect wires, all good but this sensor not measuring good and of course regeneration not working. I tried to measure resistance of sensor and heating with heating gun, it starts cold with 200 kohm and when I heating it it goes to 350 kohm. Same value with other good working sensor.. What could be problem? Thank you

[Moldovan1]

200 Kom is too high value. Place one resistor in place of sensor with value 200-300 Om and check Temp on soft.