[AROUNDLOCKS]

hi to all
could someone please check this dump to see if corrupt
i have customers eis and key
he said key was from car  but i repaired key back to life 
key was number 5 but in eis it was not used and ssid was different
i read password from key but was dubious of making a new key with this password
so i removed mcu from eis and read dump 
ive made new nec key and eis says it programmed and enabled but eis refuse to turn
so either fault with dump or eis fault
eis on bench with 14v stable power
i think car was jump started  and has caused this problem
i would be grateful of all help

kind regards
aroundlocks

ps and happy new year to all

[raffy haddad]

hello in the dump you have first 3 keys are used and all are enabled
and it look good
the password is
C0 65 53 59 2E F0 9B A5
now put everything back reade eis data and put pass and program new key and try
don't count on the old key
good luck

here keys rom 51

[AROUNDLOCKS]

hi raffy
i have created key onto nec key 051 format
eis is saying key is enabled and used in slot 5 as shown in attached pictures
but key refuse to turn eis
im not sure if eis has fault
when on bench 14v stable eis sits at 3 amp then drops to 0 as it should
but when key inserted it goes to 10 amp and stays at that for a long time
if key enabled and fine why would eis not turn
eis will go between 3 and 4 amp for a split second and has done that from the start before mcu removal
mcu solderd back on perfect and checked under microscope
i have spare eis but dont realy what to swap mcu/s as the 1 inside the unit looks a right pain to change
if you have any idea i would be grateful as to what fault eis might have

kind regards
aroundlocks

[raffy haddad]

did you check the steering lock ?

[AROUNDLOCKS]

hi raffy
i shall virgin lock and test again
and give you the result
thank you for your time / i am learning

kind regarsd
aroundlocks

[bersch8688]

I look later
First Family