[Rieger]

I have a 2015 F11 that had entrynav and I put NBT.
I can not put FSC, either by USB or manual. NBT date 2013, F11 date 2015
When trying to flash da-me this error:

Read SVT before TAL execution started.

TAL execution started.
VCM Update: VCM-Update is deactivated. VCM will not be updated. [C197]
ExecutionID=2019/01/03-18:58:56.344
[] prepareTALExecution started [PROGRESS]
[] prepareTALExecution finished [PROGRESS]
[] prepareVehicleForFlash started [PROGRESS]
[] prepareVehicleForFlash finished [PROGRESS]
[] SVK-Ist does not match expected SGBMIDs for ecu ECUId:HU_NBT_0x63. Excpected (relevant process classes only): [hwel_00001295-001_021_021], Actual (relevant process classes only): [hwel_00000df5-001_007_007], Missing SGBMID(s): [hwel_00001295-001_021_021], Surplus SGBMID(s): [hwel_00000df5-001_007_007] [THROWABLE]
[HU_NBT - 63] There was an error during TAL execution, please check the log files. [WARN]
[HU_NBT - 63] - [Exception - HU_NBT - 63] SVK-Ist does not match expected SGBMIDs for ecu ECUId:HU_NBT_0x63. Excpected (relevant process classes only): [hwel_00001295-001_021_021], Actual (relevant process classes only): [hwel_00000df5-001_007_007], Missing SGBMID(s): [hwel_00001295-001_021_021], Surplus SGBMID(s): [hwel_00000df5-001_007_007]
[HU_NBT - 63] installECUBL started [PROGRESS]
[HU_NBT - 63] installECUBL finished [PROGRESS]
[HU_NBT - 63] finalizeECUBLUpdate started [PROGRESS]
[HU_NBT - 63] finalizeECUBLUpdate finished [PROGRESS]
[] job failed with negative response error: 
code: ECU is not in correct session after bootloader update has been finished!
description: no detailed description available
severity: ERROR
[THROWABLE]
[] finalizeVehicleFlash started [PROGRESS]
[] finalizeVehicleFlash finished [PROGRESS]
[] prepareVehicleForCoding started [PROGRESS]
[] prepareVehicleForCoding finished [PROGRESS]
[] finalizeVehicleCoding started [PROGRESS]
[] finalizeVehicleCoding finished [PROGRESS]
[] finalizeTALExecution started [PROGRESS]
[] finalizeTALExecution finished [PROGRESS]
TAL execution finished [TAL_EXECUTION_FINISHED]
TAL-Execution finished with status: "FinishedWithError". [C207]
TAL execution finished. Duration: "3min 22s". [C206]

Read SVT after TAL execution started.
Read SVT after TAL execution finished.

[sebastianfernandes]

When calculating svt_soll use hw id actual tab and save it. Then do tal and execute..
hw id mismatch error.

[BMWzone]

You can use after Tal Calculating before Save KIS\SVT Target HW-IDs from SVT actual.
It's risky operation, only for NBT it is recommended, anyway if you have calculated same donor FA you should find right HWEL, maybe there will be differences in hardware type DAB o RSE

[miguelsilv6]

Hi,

I have this error when I tried to update my NBT.

[HU_NBT - 63] - [Exception - HU_NBT - 63] negative response error:
code: invalid number of segments in ODX data
description: MCDException in Job MCD3_PerformECUFlash_Http, Context: service ReadDataByIdentifier Flash Timing Parameter, Type: com.bmw.prodias.exceptions.mcd.ParameterizationException, Message: Code=57363, CodeDescription='Object not found in data base. The vendor specific part contains detailed information about the error.', Severity=2051, VendorCode=30, VendorCodeDescription='could not find the flash file swfl_00001e6b.bin.002_049_003 inside flash data root C:\Data\psdzdata\swe', [Severity=2051][ErrorCode=57363][ErrorCodeDescription=Object not found in data base. The vendor specific part contains detailed information about the error.][VendorCode=30][VendorCodeDescription=could not find the flash file swfl_00001e6b.bin.002_049_003 inside flash data root C:\Data\psdzdata\swe]; ECU: HU_NBT_63_ETHERNET_63
severity: ERROR

[] - [Exception - HU_NBT - 63] negative response error:
code: invalid number of segments in ODX data
description: MCDException in Job MCD3_PerformECUFlash_Http, Context: service ReadDataByIdentifier Flash Timing Parameter, Type: com.bmw.prodias.exceptions.mcd.ParameterizationException, Message: Code=57363, CodeDescription='Object not found in data base. The vendor specific part contains detailed information about the error.', Severity=2051, VendorCode=30, VendorCodeDescription='could not find the flash file swfl_00001e6b.bin.002_049_003 inside flash data root C:\Data\psdzdata\swe', [Severity=2051][ErrorCode=57363][ErrorCodeDescription=Object not found in data base. The vendor specific part contains detailed information about the error.][VendorCode=30][VendorCodeDescription=could not find the flash file swfl_00001e6b.bin.002_049_003 inside flash data root C:\Data\psdzdata\swe]; ECU: HU_NBT_63_ETHERNET_63
severity: ERROR

TAL-Execution finished with status: "FinishedWithError". [C207]
TAL execution finished. Duration: "13min 11s". [C206]