Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Opel BCM read
05-01-2019, 16:30 PM,
Post: #1
|
|||
|
|||
Opel BCM read
Hello, Can someone tell me how I can read pin code from an Opel Vectra C BCM, I have OP-COM and CarProg at home. Thank you very much
|
|||
05-01-2019, 17:01 PM,
Post: #2
|
|||
|
|||
RE: Opel BCM read
Opcom can not read pin code. You can try with carprog from engine ecu.
|
|||
05-01-2019, 18:30 PM,
Post: #3
|
|||
|
|||
RE: Opel BCM read
Ok, I have only the problem that the Opel BCM is no longer installed in the car, I bought it on Ebay and unfortunately, the seller can not pin because I can tell me there perhaps help and say how the procedure is...
|
|||
05-01-2019, 18:32 PM,
Post: #4
|
|||
|
|||
RE: Opel BCM read
Open and post photos of PCB
If I helped you please add *THANKS* + *REP*
Solutions.. Tuning, Deletes, Immo, Crash data, Pin codes & much more! |
|||
05-01-2019, 19:26 PM,
(This post was last modified: 05-01-2019, 19:27 PM by dabaca.)
Post: #5
|
|||
|
|||
RE: Opel BCM read
(05-01-2019, 18:30 PM)OpelVecci Wrote: Ok, I have only the problem that the Opel BCM is no longer installed in the car, I bought it on Ebay and unfortunately, the seller can not pin because I can tell me there perhaps help and say how the procedure is...Read the eeprom of BCM. with a carprog read the pin of ecu. once you have a pin you can use op-com. you will need both pin. |
|||
07-01-2019, 18:03 PM,
Post: #6
|
|||
|
|||
RE: Opel BCM read
Thanks for the info, but which pins do I have to connect where, unfortunately I know very little about Carprog. I still have to take pictures
Photos from BCM (07-01-2019, 18:03 PM)OpelVecci Wrote: Thanks for the info, but which pins do I have to connect where, unfortunately I know very little about Carprog. pictures |
|||
07-01-2019, 21:25 PM,
(This post was last modified: 07-01-2019, 21:31 PM by 23Andi23.)
Post: #7
|
|||
|
|||
RE: Opel BCM read
(07-01-2019, 18:03 PM)OpelVecci Wrote: Thanks for the info, but which pins do I have to connect where, unfortunately I know very little about Carprog. I still have to take pictures Try this pinout |
|||
Reputation: +1 - raffy haddad [+1] | |||
08-01-2019, 09:33 AM,
(This post was last modified: 08-01-2019, 15:02 PM by Clusters.)
Post: #8
|
|||
|
|||
RE: Opel BCM read
(07-01-2019, 21:25 PM)23Andi23 Wrote:Ok, I'll try, but what do I have to do to take picture 1 or picture 2 and what do I have to select in the program? Can you still tell me that?(07-01-2019, 18:03 PM)OpelVecci Wrote: Thanks for the info, but which pins do I have to connect where, unfortunately I know very little about Carprog. I still have to take pictures |
|||
08-01-2019, 15:05 PM,
Post: #9
|
|||
|
|||
RE: Opel BCM read
If you've got exactly same pins on the side and they're going to the right pins in IC you can use picture 1. If there's no continuity use picture 2.
|
|||
08-01-2019, 15:41 PM,
Post: #10
|
|||
|
|||
RE: Opel BCM read
(08-01-2019, 09:33 AM)OpelVecci Wrote: Ok, I'll try, but what do I have to do to take picture 1 or picture 2 and what do I have to select in the program? Can you still tell me that? Pinout i Postet should match with your PCB on Carprog go to MCU - Motorola - HC12 and choose type you want read. |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content