[a1m1m1a1r1]

I bought used FRM “ 61356992947 " from eBay for my F10 2011
I’m trying flash it but fail !

I used vcm to find I-Step (shipm) “F010-06-410”
but in tal calculating I not found my car I-Step so I try select "F010-06-500"
I got red hwel for FRM only
I chose HW-IDs from SVTactual 
then when try flash it I got this error:

 "job failed with negative response error repeat job
description: Service RD returned a negative response with response code requestOutOfRange”

  
Any idea about solve it?

[TurboDriver]

You have calculated wrong tal for this FRM. HWEL must be black after calculation. If you know VIN of that car you can pick I-step with similar date then calculate again until you get HWEL in BLACK

[SweetBMW]

It’s wrong frm. For your car.

[chang2]

Hello,

hwel is not correct!

check SA

thanks

[navigatepark]

hi
calculated FW not compatible with your VIN data

you need check VIN  SA codes
if its change module , not compatible with your car

[a1m1m1a1r1]

Thanks for all
I found the donor car :2013 BMW 7 series
Is there any method to make this module works in my car ?
if try read microprocessor using x prog and write another firmware Can will work?

[TurboDriver]

if part is wrong it won't work simple as that. If it doesn't work after coding it won't work at all

[willisodhiambo]

Thanks for all
I found the donor car :2013 BMW 7 series
Is there any method to make this module works in my car ?
if try read microprocessor using x prog and write another firmware Can will work?

Only if the chip is the same. If it is not, FRM will brick. Get compatible FRM

[emhtuning]

Thanks for all
I found the donor car :2013 BMW 7 series
Is there any method to make this module works in my car ?
if try read microprocessor using x prog and write another firmware Can will work?

press " HW-IDs from SVTactual " , if those 2 green arrows next to FRM are disappeared then you might be OK and you will be able to flash the FRM and code it too , 
even Hardware is different for your car . there is 99% chance that it will work .

give it a try .

[BMWzone]

I wouldn't do it, it will lose firmware