Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Citroen C3 1.4 HDI 2004 Siemens SID 804 Immo off
14-01-2019, 18:21 PM,
Post: #11
|
|||
|
|||
RE: Citroen C3 1.4 HDI 2004 Immo off
(14-01-2019, 17:08 PM)stunt_rider Wrote: i want to try to virgin the ecu . Post dumps of eprom and flash and someone will help you All VAG immo off or transfer - change Power Class up to & including WFS6 SHE -VAG DCM 6.2 3.7 - immo off also Bcm2, Elv, TC DSG DL381 DQ200 DQ250 DQ400 DQ500: Here:
AKL MQB - + A6-A7-A8-Touareg- generate sync key file - Many tools available = VAG ME7x LC AL NLS offline MOD tool + kg- BMW EDC16 IMMO TOOL + KG - BMW EWS remover tool + KG - med17 immo v2.3 - BMW-LAND ROVER-MINI EWS OFF TOOL + many more sw: PM me with what you need. |
|||
Reputation: +1 - stunt_rider [+1] | |||
14-01-2019, 19:01 PM,
Post: #12
|
|||
|
|||
RE: Citroen C3 1.4 HDI 2004 Immo off
Dump from BSI ?
And flash from ECU ? Or must i make full read (KTAG) the ecu? or Read via OBD in Car? |
|||
20-01-2019, 23:23 PM,
Post: #13
|
|||
|
|||
RE: Citroen C3 1.4 HDI 2004 Immo off
I tried to read the ecu with ktag and fg tech but it is not on the list, and so i have no idea where to connect it , on the list are only sid 803 and 803A but there are different i have SID 804 !
Do someone know how i can read the ecu ? Or should i put back in car and try obd? |
|||
24-01-2019, 10:36 AM,
Post: #14
|
|||
|
|||
RE: Citroen C3 1.4 HDI 2004 Immo off
i think i must solder out the eeprom
On this ecu , is this right? |
|||
26-01-2019, 01:53 AM,
Post: #15
|
|||
|
|||
RE: Citroen C3 1.4 HDI 2004 Immo off
i desoldered the 95160 EEPROM chip from BSI and readed with minipro there are only all zeros ......
Dump bad? Is that the reason why the car not start? How can this happen ?? It is a SIEMENS BSI F0x , and Immo Service Tool v1.2 says EEPROM is 95128 but there was 95160 inside, i readed the chip first as 95160 it has 2kb file size and after that i readed it as 95128 with 16kb file size, but still all zeros... Immo Service Tool v1.2 says that SIEMENS BSI with E0x number has 95160 EEPROM and with F0x number 95128 And Immo service Tool v1.2 says that there is IMMO OFF Solution for the 29F400 EEPROM on ECU, could that be true ???? Then i would just unsolder the 29F400 and try this But i am not sure because everybody says there is no solution , and i cant find a way to read out the 29F400 flash and i never readed such one with MINIPRO programmer not sure if it will work... |