Please make sure you read Rules! and DO NOT upload/post any illegal softwares or Pirated Material , Thank you for understanding :)
  1. ATM - Balkan

    atm balkan file service
  2. MHR TuninG

  3. MOD FILES

  4. TPT TUNING

  5. Soft Platform



REWORKED: EU Kess V2
25-01-2019, 09:44 AM, (This post was last modified: 25-01-2019, 09:52 AM by retroid.)
Post: #11
RE: REWORKED: EU Kess V2
this is right.  

I also used to sell reworked units with almost all components replaced.
the quality of the rework was professional with not a single component overheated in the process.
I used only top quality soldering products and station.  
every pcb was custom stamped and some work stages were photographed and delivered to costumer with the reworked unit.  my reworks were complete not just the "list" that is floating around.
every single unit was pcb bare tested and filmed in the process.

Initially  I had a bach of 5 units of kess and 4 ktags.  the price was 300 euro / unit.  
I sold none on "the sites" but get only ridiculous offers and very silly questions.

eventually I sold out locally and never reworked another unit again and I never will for commercial purposes due to litlle to non profit vs time vs quality of work & presentation.

.... so , again 8baller is right  yes
Quote this message in a reply
[+] 2 users say Thank You to retroid for this post
25-01-2019, 11:59 AM,
Post: #12
RE: REWORKED: EU Kess V2
i paid around £220gbp for a reworked unit i think (so approx 300e same as you say)

i don't think id bother trying to fully rework one for the hassle

i always tell it how it is wink
Quote this message in a reply
[+] 1 user says Thank You to 8baller for this post
26-01-2019, 10:15 AM,
Post: #13
RE: REWORKED: EU Kess V2
I think one of a possible problem by using Kess could be a bad PC system. Therefore I recommend to install the Kess software in a fresh installed VM (Win7x86) without any other software (virus protection, etc.)
Quote this message in a reply
26-01-2019, 11:01 AM,
Post: #14
RE: REWORKED: EU Kess V2
... now you can install W7 + drivers on the latest machines no need to use VM.

an SSD more stable system is recommended.
also when reworking all connectors inside the ktag must be replaced with proper quality ones and the use of top quality usb cables is mandatory.

(the connectors rework must be done with zero flux contamination.
if one connector is contaminated it must be replaced. you just can`t proper / complete clean it )
Quote this message in a reply
26-01-2019, 15:09 PM,
Post: #15
RE: REWORKED: EU Kess V2
i dont understand people using VM for remapping

i would be worried about losing comms

i always tell it how it is wink
Quote this message in a reply
[+] 1 user says Thank You to 8baller for this post
27-01-2019, 01:18 AM,
Post: #16
RE: REWORKED: EU Kess V2
(25-01-2019, 09:00 AM)8baller Wrote:  
(25-01-2019, 00:54 AM)no_name Wrote:  Me also want to buy good working clone, since I am not able to rework it my self, but I dont see how one can sell reworked unit for about 250-400-500e when china clone is about 50e and rework components are about 20-30e, it is ok like to take 20-50 and postage, but so expensive, and we always found like cheap price for members, or special discount, or 50% off or... or... and still no good prices...

if a chinese clone and all the rework items are really that cheap then surely you would teach yourself how to rework them

for me you are paying for the experience on how to rework, the soldering quality and a pre-done unit working out the box

these EU units sold by a few people are just fancy colours imo

Even 300e is ok but for reworked china unit 500 is not fair...
When I am trying to learn SMD soldering, I now why someone can take like 150e for his work maybe more...
My problem is that even my soldering station is china made, bat also wick, solder, flux is aliexpress quality so it is not even worth trying to rework... 
Anyway I will see what can I do....
Quote this message in a reply
05-02-2019, 17:26 PM,
Post: #17
RE: REWORKED: EU Kess V2
All right Guys, so a little update from me: My Kess 2.47 has worked like a charm ever since. I found that my obd pinout cable was malfunctioning, resulting in poor Connection. So all good. And reworked my beloved pinout cable at the same time laughing

Diesel Fanatic!  evilgrin 
Great tutorial for learning about remapping:
https://www.youtube.com/playlist?list=PL...4l65Cu6W-r
If i helped you, don't forget THX + REP. wink2  
Quote this message in a reply
15-05-2019, 09:19 AM, (This post was last modified: 15-05-2019, 09:21 AM by elmer.)
Post: #18
RE: REWORKED: EU Kess V2
(25-01-2019, 09:44 AM)retroid Wrote:  this is right.  

I also used to sell reworked units with almost all components replaced.
the quality of the rework was professional with not a single component overheated in the process.
I used only top quality soldering products and station.  
every pcb was custom stamped and some work stages were photographed and delivered to costumer with the reworked unit.  my reworks were complete not just the "list" that is floating around.
every single unit was pcb bare tested and filmed in the process.

Initially  I had a bach of 5 units of kess and 4 ktags.  the price was 300 euro / unit.  
I sold none on "the sites" but get only ridiculous offers and very silly questions.

eventually I sold out locally and never reworked another unit again and I never will for commercial purposes due to litlle to non profit vs time vs quality of work & presentation.

.... so , again 8baller is right  yes

please i am following the reworking can you tell me which one is the right one?
compontent numer 5 in the photo

https://eu.mouser.com/ProductDetail/Nexp...sSXFklBWY=

or

https://www.mouser.it/ProductDetail/Nexp...Pg8w%3D%3D

tranks


Attached Files Thumbnail(s)
   
Quote this message in a reply
16-05-2019, 07:29 AM,
Post: #19
RE: REWORKED: EU Kess V2
Anyone done Delphi CRD3.x mercedes thru obd with reworked kess v2 2.47?
Quote this message in a reply
16-05-2019, 19:41 PM, (This post was last modified: 16-05-2019, 19:49 PM by tkasak.)
Post: #20
RE: REWORKED: EU Kess V2
this:
BC807-25W,115
Quote this message in a reply


Possibly Related Threads...
Thread Author Replies Views Last Post
0DPF Kess 5.017 With NEW K-Suite 2.47 Free Activation volavka 1,380 94,776 1 hour ago
Last Post: Clusters
  Update Kess 5.017 With NEW K-Suite 2.47 No NEED Activation clevo 2 299 22-05-2019, 01:06 AM
Last Post: Extcy
RHonda Honda crv III 2008 2.2icdti EDC16C31 KESS by OBD?? misaki 1 91 20-05-2019, 09:51 AM
Last Post: SSAutoPerformance
  Kess 5.017 KSUITE 2.47 VR? EngineGeneration 2 159 15-05-2019, 09:14 AM
Last Post: EngineGeneration
  BMW E63 ME9.2 Kess error mugenman1111 2 124 05-05-2019, 14:13 PM
Last Post: mugenman1111
KOpel Opel Movano 146hp 2.3 2016 Kess V2 ID reading problem. bemek01 0 109 05-05-2019, 12:40 PM
Last Post: bemek01
0Scope Ksuite 2.25 Ktag/Kess v2 rs@chip 8 1,294 03-05-2019, 16:05 PM
Last Post: Squeeto
  Kess 5.028 r.luisneto 0 224 01-05-2019, 17:35 PM
Last Post: r.luisneto
  Is this a good choice KESS V2 V5.017 Red PCB Firmware EU Version (for Newbie!) bemek01 3 212 28-04-2019, 21:03 PM
Last Post: DieselBoost
1Bosch EDC17CV41 KESS Experience DieselBoost 0 130 28-04-2019, 20:45 PM
Last Post: DieselBoost

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content