Possibly Related Threads…

***graphys*** · 13-01-2019, 21:11 PM,

Hi everybody.

I have a problem.

I tried to flash nbt evo on car and it returned an error at the end of btld file. And it doesn’t want to start again. Try ista and tool32 but nbt evo unit not responding.

Try ping but unit not response.

My nbt evo unit is dead? Can we fix it? What we do now?

I think connect serial and access eeprom and write bootloader again.

Can any one make this?

Best regards.

***rs@chip*** · 13-01-2019, 22:52 PM,

(13-01-2019, 21:11 PM)graphys Wrote: Hi everybody.

I have a problem.

I tried to flash nbt evo on car and it returned an error at the end of btld file. And it doesn’t want to start again. Try ista and tool32 but nbt evo unit not responding.

Try ping but unit not response.

My nbt evo unit is dead? Can we fix it? What we do now?

I think connect serial and access eeprom and write bootloader again.

Can any one make this?

Best regards.

How did you flash it? ethernet?esys..ista..?try disconect batery for a while and try ID it again by tool32 or ista reanimation unit maybe helps you. good luck !

***vilord*** · 13-01-2019, 23:17 PM,

Was it retrofitted or factory in the car? Does the car have a ZGW2 / gateway module?

I've heard that flashing an evo over ethernet directly without a zgw2 can sometimes have issues with networking.

If you're flashing with e-sys over ethernet, what is your computer's ip address and netmask?

***graphys*** · (This post was last modified: 14-01-2019, 09:38 AM by graphys.)

(13-01-2019, 22:52 PM)rs@chip Wrote:
(13-01-2019, 21:11 PM)graphys Wrote: Hi everybody.

I have a problem.

I tried to flash nbt evo on car and it returned an error at the end of btld file. And it doesn’t want to start again. Try ista and tool32 but nbt evo unit not responding.

Try ping but unit not response.

My nbt evo unit is dead? Can we fix it? What we do now?

I think connect serial and access eeprom and write bootloader again.

Can any one make this?

Best regards.

How did you flash it? ethernet?esys..ista..?try disconect batery for a while and try ID it again by tool32 or ista reanimation unit maybe helps you. good luck !

I am using lastest esys pro and psdzdata. Try disconnect battery and try again ista and tool32 but unit not response. Any another solution?

(13-01-2019, 23:17 PM)vilord Wrote: Was it retrofitted or factory in the car? Does the car have a ZGW2 / gateway module?

I've heard that flashing an evo over ethernet directly without a zgw2 can sometimes have issues with networking.

If you're flashing with e-sys over ethernet, what is your computer's ip address and netmask?

My car is f30. And came to nbt from factory. I try upgrade on car with esys pro. I upgrade some other modules. It is perfecly working. But Nbt evo is gone.

***Hoborg*** · 27-01-2019, 12:21 PM,

U used Enet or ICOM ?

***graphys*** · 27-01-2019, 21:44 PM,

I

(27-01-2019, 12:21 PM)Hoborg Wrote: U used Enet or ICOM ?

Used Enet.

Can anyone fix this? I think connect nbt on serial port and write bootloader again.

***duckdonald*** · (This post was last modified: 27-01-2019, 21:51 PM by duckdonald.)

are you sure that NBT is not detected?
wait 20 minutes after connecting it, to use esys, ..
sometimes it activates late, on the network

ID4 or ID5?

***graphys*** · 27-01-2019, 22:28 PM,

(27-01-2019, 21:50 PM)duckdonald Wrote: are you sure that NBT is not detected?
wait 20 minutes after connecting it, to use esys, ..
sometimes it activates late, on the network

ID4 or ID5?

I am sure. Wait 1 day and try a lot times. When i igntion on nbt screen say no signal and head unit fan working full speed.

ID5.

***bmwcoder75*** · 27-01-2019, 22:54 PM,

Can you still ping it at 169.254.199.99?
If not, looks like bootloader is corrupted

***futa*** · 16-02-2019, 04:59 AM,

My friend is suffering from the same problem.
Please tell me if there is a solution to restore the boot loader.
Ping of 169.254.199.99 is unresponsive.
Please tell me how to solve with Icom +esys or other way
I can bench flush with zgw.
Thank you

Possibly Related Threads…
Thread		Author	Replies	Views	Last Post
	F48 BDC_Gw dead	qbek90	4	273	30-03-2024, 04:22 AM Last Post: qbek90
	Flashing a stock box map to an E60 with XHP?	GoNz0-	10	375	20-03-2024, 09:33 AM Last Post: tomaxsas
	ZGW2 dead can be rescued?	walkernight88	5	367	16-03-2024, 21:15 PM Last Post: walkernight88
	flashing modules hw-id	redog4dy	5	350	04-03-2024, 13:26 PM Last Post: redog4dy
	Power supply for coding flashing	kklobo	14	956	29-02-2024, 08:37 AM Last Post: nBlacky
	problem with flashing CHAMP2 module (the programming dependencies are not correct)	azwgh	17	833	11-02-2024, 19:39 PM Last Post: azwgh
	CAS 3 need repair after flashing	stydly	10	519	02-02-2024, 15:43 PM Last Post: 16eddi67
	f10 2011, flashing zgw	redog4dy	2	203	18-01-2024, 10:19 AM Last Post: redog4dy
	E-Sys flashing with "hwDeinstall" and "hwInstal"	cm048	7	2,739	10-01-2024, 08:56 AM Last Post: Node
	Request Psdzdata for flashing NBT EVO and EntryNav2 Latest version	jojosqsq	2	307	30-12-2023, 10:49 AM Last Post: Fx82

Contact Us