Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

Nbt Evo Dead After Flashing
16-02-2019, 05:05 AM,
Post: #11
RE: Nbt Evo Dead After Flashing
Does anything show on the screen? What model of screen are you using?
Also, are you trying to flash in a car? If yes, what car?

I've had an evo shut off half way through loading the bootloader, it doesn't actually write the bootloader until the whole thing has been transferred, so the bootloader should still be there, but flashing with a ZGW might be ideal.

I've also had a lot of problems with the ethernet port functioning while my e9x nbt emulator is connected, so for flashing I disconnect the emulator and use a ZGW and a usb-can device for sending wakeup signals.
Quote this message in a reply
[+] 1 user says Thank You to vilord for this post
16-02-2019, 05:45 AM,
Post: #12
RE: Nbt Evo Dead After Flashing
vilord Thank you
I was flushing with zgw on the bench.
When turning on the power again, the screen is a blue screen in the flash mode.
Communication with the head unit is confirmed again.
Quote this message in a reply
16-02-2019, 07:45 AM,
Post: #13
RE: Nbt Evo Dead After Flashing
The problem was solved.
It is now possible to communicate by restarting pc and connecting Ethernet directly to Oh oabr of the head unit.
Quote this message in a reply
[+] 1 user says Thank You to futa for this post
27-02-2019, 15:48 PM, (This post was last modified: 27-02-2019, 15:50 PM by rickynguyen.)
Post: #14
RE: Nbt Evo Dead After Flashing
(16-02-2019, 07:45 AM)futa Wrote:  The problem was solved.
It is now possible to communicate by restarting pc and connecting Ethernet directly to Oh oabr of the head unit.
My evo got same problem today, can not see it in esys, tool32... after failed flash.

handshake
Quote this message in a reply
25-03-2019, 07:17 AM,
Post: #15
RE: Nbt Evo Dead After Flashing
(16-02-2019, 07:45 AM)futa Wrote:  The problem was solved.
It is now possible to communicate by restarting pc and connecting Ethernet directly to Oh oabr of the head unit.

hi i have same issue
what do you mean with "directly"
ethernet from zgw to oabr
or
ethernet from enet cable to oabr ?
Quote this message in a reply
25-03-2019, 08:03 AM, (This post was last modified: 25-03-2019, 08:04 AM by rickynguyen.)
Post: #16
RE: Nbt Evo Dead After Flashing
(25-03-2019, 07:17 AM)retrobmwtr Wrote:  
(16-02-2019, 07:45 AM)futa Wrote:  The problem was solved.
It is now possible to communicate by restarting pc and connecting Ethernet directly to Oh oabr of the head unit.

hi i have same issue
what do you mean with "directly"
ethernet from zgw to oabr
or
ethernet from enet cable to oabr ?
ethernet from zgw to oabr if you flash it on car.
ethernet from enet cable to oabr if you flash it on bench and no need ZGW2

handshake
Quote this message in a reply
25-03-2019, 19:25 PM, (This post was last modified: 25-03-2019, 19:26 PM by retrobmwtr.)
Post: #17
RE: Nbt Evo Dead After Flashing
(25-03-2019, 08:03 AM)rickynguyen Wrote:  
(25-03-2019, 07:17 AM)retrobmwtr Wrote:  
(16-02-2019, 07:45 AM)futa Wrote:  The problem was solved.
It is now possible to communicate by restarting pc and connecting Ethernet directly to Oh oabr of the head unit.

hi i have same issue
what do you mean with "directly"
ethernet from zgw to oabr
or
ethernet from enet cable to oabr ?
ethernet from zgw to oabr if you flash it on car.
ethernet from enet cable to oabr if you flash it on bench and no need ZGW2

I am on bench smile
then how should be the detailed connection config on esys?

i think i will tick
connection via gateaway url : 169.254.199.99 :  6801
right ?
Quote this message in a reply
25-03-2019, 19:42 PM, (This post was last modified: 25-03-2019, 19:42 PM by bmwcoder75.)
Post: #18
RE: Nbt Evo Dead After Flashing
Quote:ethernet from zgw to oabr if you flash it on car.
ethernet from enet cable to oabr if you flash it on bench and no need ZGW2

No wonder why you having so many issues man...
Quote this message in a reply
17-04-2019, 05:55 AM,
Post: #19
RE: Nbt Evo Dead After Flashing
i have the same problem or NBT HU , so no OBAR port, how to communicate with this dead unit, any suggession ?
Quote this message in a reply
02-10-2019, 20:44 PM,
Post: #20
RE: Nbt Evo Dead After Flashing
me too, had a evo with bootloader bricked. some way to recover at bench?
nobody try it?

If this post helped you don't forget to press rep  yes and thanks  under
Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  Flashing a stock box map to an E60 with XHP? GoNz0- 10 296 20-03-2024, 09:33 AM
Last Post: tomaxsas
  ZGW2 dead can be rescued? walkernight88 5 291 16-03-2024, 21:15 PM
Last Post: walkernight88
XZBMW flashing modules hw-id redog4dy 5 305 04-03-2024, 13:26 PM
Last Post: redog4dy
  Power supply for coding flashing kklobo 14 809 29-02-2024, 08:37 AM
Last Post: nBlacky
XZBMW problem with flashing CHAMP2 module (the programming dependencies are not correct) azwgh 17 655 11-02-2024, 19:39 PM
Last Post: azwgh
  CAS 3 need repair after flashing stydly 10 455 02-02-2024, 15:43 PM
Last Post: 16eddi67
XZBMW f10 2011, flashing zgw redog4dy 2 179 18-01-2024, 10:19 AM
Last Post: redog4dy
XZBMW E-Sys flashing with "hwDeinstall" and "hwInstal" cm048 7 2,663 10-01-2024, 08:56 AM
Last Post: Node
XZBMW Request Psdzdata for flashing NBT EVO and EntryNav2 Latest version jojosqsq 2 280 30-12-2023, 10:49 AM
Last Post: Fx82
XZBMW Solved ✔ E91 2010 flashing winkfp redog4dy 8 419 23-11-2023, 06:32 AM
Last Post: redog4dy

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content