Please make sure you read Rules! and DO NOT upload/post any illegal softwares or Pirated Material , Thank you for understanding :)
  1. ATM - Balkan

    atm balkan file service
  2. MHR TuninG

  3. MOD FILES

  4. TPT TUNING

  5. Soft Platform



WAKE UP ERROR ON SOME ECU ONLY
14-01-2019, 12:16 PM,
Post: #1
WAKE UP ERROR ON SOME ECU ONLY
Hi i have a china kess red pcb  5.0.17 bought one year ago and never used.
now i start using it.
i read a sid 305 and a magneti marelli without issues
but when i tryed an edc16c19 of a fiat sedici it gives me the wake up error.
is the sd card gone or is it a different issue?
Quote this message in a reply
14-01-2019, 12:45 PM,
Post: #2
RE: WAKE UP ERROR ON SOME ECU ONLY
think your kess need a rework and need a good sd card with cid id
Quote this message in a reply
14-01-2019, 21:24 PM,
Post: #3
RE: WAKE UP ERROR ON SOME ECU ONLY
Wake up error only on Kline ECU? So, try to setup pull up resistor (in soft) to 200 Om. But, best is to change kline transistor inside KESS.
Quote this message in a reply
16-01-2019, 11:54 AM, (This post was last modified: 16-01-2019, 12:30 PM by chicco.)
Post: #4
RE: WAKE UP ERROR ON SOME ECU ONLY
ciao, no the error is on can line

(14-01-2019, 12:45 PM)privatay Wrote:  think your kess need a rework and need a good sd card with cid id

is there someone here on the forum who can rework my kess in europe?
Quote this message in a reply
16-01-2019, 17:43 PM,
Post: #5
RE: WAKE UP ERROR ON SOME ECU ONLY
Contact 23Andi23
Quote this message in a reply
[+] 1 user says Thank You to bmwadriatic for this post
16-01-2019, 21:17 PM,
Post: #6
RE: WAKE UP ERROR ON SOME ECU ONLY
thanks @bmwadriatic, i've altready wrote to him
Quote this message in a reply
17-01-2019, 19:56 PM,
Post: #7
RE: WAKE UP ERROR ON SOME ECU ONLY
I had  the same problem on the table when using a pinout cable. A bad connection was the cause, so check the connections before reworking. 
Best regards

Diesel Fanatic!  evilgrin 
Great tutorial for learning about remapping:
https://www.youtube.com/playlist?list=PL...4l65Cu6W-r
If i helped you, don't forget THX + REP. wink2  
Quote this message in a reply
18-01-2019, 11:23 AM,
Post: #8
RE: WAKE UP ERROR ON SOME ECU ONLY
connection between which elements?
Quote this message in a reply
18-01-2019, 21:03 PM,
Post: #9
RE: WAKE UP ERROR ON SOME ECU ONLY
(18-01-2019, 11:23 AM)chicco Wrote:  connection between which elements?

Between Kess and ECU.

Diesel Fanatic!  evilgrin 
Great tutorial for learning about remapping:
https://www.youtube.com/playlist?list=PL...4l65Cu6W-r
If i helped you, don't forget THX + REP. wink2  
Quote this message in a reply
19-06-2019, 11:49 AM,
Post: #10
RE: WAKE UP ERROR ON SOME ECU ONLY
I have same issue, most cars never have a problem, tried a volvo S40 2.0D and a ford focus 2.0D, both share same engine and SID, get wake up error when it asks to turn ignition on and off
Quote this message in a reply


Possibly Related Threads...
Thread Author Replies Views Last Post
ZTAudi audi a3 1.9 tdi 110hp year 2001 error obd2 manueldord 5 261 13-07-2019, 15:01 PM
Last Post: yudon
YTMercedes TRASDATA ERROR E01100F writing MERCEDES ACTROS MCM 2:1 MARTINHDX 0 218 27-05-2019, 18:42 PM
Last Post: MARTINHDX
ZTAudi Audi A6 3.0 v6 tdi 2007 with edc 16cp34 help checksumm error calculate for full bdm oltianmunga 3 253 25-05-2019, 15:11 PM
Last Post: oltianmunga
ZVW Simos PC2.1 communication error Willinickersen 17 534 16-05-2019, 10:56 AM
Last Post: Willinickersen
  BMW E63 ME9.2 Kess error mugenman1111 2 236 05-05-2019, 14:13 PM
Last Post: mugenman1111
ZVW Solved ✔ Simos prc2.1 boot pin tin removed for error :( HELP! zzapp 10 3,251 05-05-2019, 08:06 AM
Last Post: Willinickersen
  Kess v2 Error in addressing the writing DieselBoost 2 275 22-04-2019, 17:04 PM
Last Post: DieselBoost
VToyota Kess v2 wake up error for toyota HYtuner 1 611 19-04-2019, 07:39 AM
Last Post: waqar_vk
  Ktag - The tool is not powered correctly error, is it dead? amit_talkin 3 244 17-04-2019, 15:04 PM
Last Post: busaman
JAlfa Alfa giulietta kess 5.017 problem "alarm clock error" edc16p mimmo-dj 2 161 15-04-2019, 15:01 PM
Last Post: mimmo-dj

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content