[ipcsr76]

Hello everyboby,
My BMW Mini R50 have a problem....
All FA VO code are lost in DME and EWS...
Who can give me a FA/VO Pack rescue for injected with ISTA/D with "import FA code" fonction.
Thanks a lot... 

BMW MINI cooper R50 03/2003
VIN : WMWRC310X0TB87521

[scorpium59]

Hi

Why do not you just create a .ssd to reinject with ncsexpert?

[ipcsr76]

Hi

Why do not you just create a .ssd to reinject with ncsexpert?

Hello, my dear,
I don’t know this manipulation with NCS...
How do we do that?
I would like an XML file with the FA/VO code to inject with ISTA if possible.
Thank you so much.

[Twoone]

Hi

Why do not you just create a .ssd to reinject with ncsexpert?

Hello, my dear,
I don’t know this manipulation with NCS...
How do we do that?
I would like an XML file with the FA/VO code to inject with ISTA if possible.
Thank you so much.

Here some examples and your option list of the car

[DenisK]

Hi

Why do not you just create a .ssd to reinject with ncsexpert?

Hello, my dear,
I don’t know this manipulation with NCS...
How do we do that?
I would like an XML file with the FA/VO code to inject with ISTA if possible.
Thank you so much.

Here some examples and your option list of the car

Hi, FA will not help him, R 50 works on ZCS and not on FA, with the set of options it will not do anything in ISTA

---

Hi

Why do not you just create a .ssd to reinject with ncsexpert?

Hello, my dear,
I don’t know this manipulation with NCS...
How do we do that?
I would like an XML file with the FA/VO code to inject with ISTA if possible.
Thank you so much.

Here some examples and your option list of the car

Hi, FA will not help him, R 50 works on ZCS and not on FA, with the set of options it will not do anything in ISTA

[AutoExe3219]

Run ZCS to calculate GM, SN and VN.
Create .SSD file and run NCS to code.

[ipcsr76]

Run ZCS to calculate GM, SN and VN.
Create .SSD file and run  NCS to code.

Hello,

With what software : "Run ZCS to calculate GM, SN and VN".

And where you place *******.SSD file in NCS repertory / folder?

Thanks.

[Vojno]

I can help you a little bit later!

[ipcsr76]

I can help you a little bit later!

OK,
Thanks a lot 

[Vojno]

If you can use NCSexper than you need the following ZCS numbers:

GM: B2310094 and the checksum is: 5
SA: 0000000008103240 and the checksum is: 0
VN: 000000000F and the checksum is: F

Select the R50 at the beginning then the ZCS and enter the VIN (WMWRC310X0TB87521) check out the checksum checkbox,
enter the GM, SA, VN witout checksum, but check out the checksum checkbox too,
If it is ok, then the same checksum can you see on a gray background!
You must write in ZCS in one of the modules. I don't remember which module stores it, sorry.