Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

Good China GNA600
11-07-2015, 18:10 PM,
Post: #21
RE: Good China GNA600
I will test Control Module update from HDS software and immobi function and post my findings when I am back from holidays. I dont have any info on clown X-horse device. I never had one. I think Tizwaz has given out for download an old 2.0.1 firmware, which someone posted here too. I think he has also a 2.0.4 or even 2.0.5 but he does not share it. It only applies to fake x-horse. The original X-horse has latest firmware 1.4.8 though when I check the download server it gives latest firmware 1.4.7. Maybe it is a new hardware part on the orignal x-horse which needed a newer firmware to make it work. I started this project with making the passthru software update to work. The HDS is more difficult to work for x64 environment but with some work it is possible as proven.

If you like my post press [Image: postbit_thx.gif] If my post has resolved your issue press [Image: postbit_reputation.gif]

Quote this message in a reply
12-07-2015, 02:08 AM,
Post: #22
Good China GNA600
If anyone has more info on this fake mvci firmware and confirmed it working it might speed up my release 3.016.033 HDS

Chime in if youve updated your fake mvci with .mfu and your results


Sent from my iPhone using Tapatalk
Quote this message in a reply
12-07-2015, 10:33 AM,
Post: #23
RE: Good China GNA600
(12-07-2015, 02:08 AM)Solidtrick Wrote:  If anyone has more info on this fake mvci firmware and confirmed it working it might speed up my release 3.016.033 HDS

Chime in if youve updated your fake mvci with .mfu and your results


Sent from my iPhone using Tapatalk


did you fix the loader in this version ?

I hear the problems not the firmware in some of the fake tool, its the fact of missing K-Line or CAN
Quote this message in a reply
12-07-2015, 13:12 PM,
Post: #24
Good China GNA600
I don't believe it's missing components because I can do immobilizer on older 2007 pilot. Yes I fixed the loader(didn't fix it because you don't need it) it's rather simple I can take pictures of inside of the cable if anyone can help. I'd like to dump to firmware that's on there but not sure how to it looks like I can add a header in maybe for something?
I might use TIS for its obd verification tool. And DT has a j2534 debugger I will try.

2 more replies and 3.016.033 is out.

Maybe someone has a j2534 application that tests the line connections
Quote this message in a reply
[+] 2 users say Thank You to Solidtrick for this post
12-07-2015, 17:07 PM,
Post: #25
RE: Good China GNA600
(12-07-2015, 13:12 PM)Solidtrick Wrote:  Yes I fixed the loader(didn't fix it because you don't need it)


??????
Yes I fixed it (didn't fix it because you didn't need it)

^ Confusing answer there mate ^ , sorry to ask again but is it fixed or not ?

I thought it was needed for immo function / keygen to work

not sure if your been hostile or its me reading too much in to things.
Quote this message in a reply
12-07-2015, 18:03 PM,
Post: #26
Good China GNA600
No no not being hostile .

Are you referring to the start hds loader? Or mvci driver installer neither are needed. I can explain or show you anytime .

If neither of those are what your talking about I have full immobi functions on latest hds with patch for him gna600 from tiz. I'm not being hostile at all.


Sent from my iPhone using Tapatalk
Quote this message in a reply
12-07-2015, 23:56 PM,
Post: #27
Good China GNA600
The hardware should support K-line it has a ST L9637D chip which is a iso9141 or k-line. The ARM processor has built in CAN support.

Here's some pics no high res but better than nothing
[Image: 0311dec34a2a8e1e4162ceae301a4d8f.jpg]
[Image: 1895eb6abd585cf5f114f3eb90828caa.jpg]
[Image: 3e0b89faa64dc86e4e9b91af2f2a5589.jpg]
[Image: b93c0386f1ebcf2f2e3747613f9342bd.jpg]



Sent from my iPhone using Tapatalk
Quote this message in a reply
13-07-2015, 07:51 AM,
Post: #28
RE: Good China GNA600
(12-07-2015, 18:03 PM)Solidtrick Wrote:  No no not being hostile .

Are you referring to the start hds loader? Or mvci driver installer neither are needed. I can explain or show you anytime .

If neither of those are what your talking about I have full immobi functions on latest hds with patch for him gna600 from tiz. I'm not being hostile at all.


Sent from my iPhone using Tapatalk

Must be me then

yer that's what I was talking about the one for HDS that changed computer time

I have to change date of computer for keygen to work dontknow, if I don't then it does not work because hds checks the time everytime it starts

Cant really tell anything from the pictures but you what to be looking at what pins are actually connected /

   
Quote this message in a reply
13-07-2015, 10:52 AM,
Post: #29
Good China GNA600
Is this what you're talking about?

http://cartechnology.co.uk/showthread.ph...2#pid54702

I assure you that works fine I know on win 7,8,10. You must run as admin and you're date must be in the given format. It's to be used with Tiz's patch for him/gna as the immobilizer files are swapped out with some old ones also. I will check on xp today to see if it works.


Sent from my iPhone using Tapatalk
Quote this message in a reply
13-07-2015, 15:10 PM,
Post: #30
RE: Good China GNA600
Yes, it doesn't seem to work at all, for me anyway on windows 7 32 or 64 bit
if I go to temp and run the test bat it will change date to 2007 but not back after finished using it
Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  HDS 3.017.012 GNA600 + HIM + SPX + XHORSE + J2534 Inspector_Gadget 45 26,062 29-04-2017, 14:47 PM
Last Post: apoelistas
RHonda Unable to connect GNA600 daamianr 1 1,471 15-02-2016, 12:35 PM
Last Post: meiguang
  Honda HDS TO Work with HIM and GNA600 Reg file TizWoz 12 12,430 12-05-2014, 17:13 PM
Last Post: thusithasam
  Honda HDS TO Work with HIM and GNA600 Reg file TizWoz 11 9,641 17-04-2014, 02:28 AM
Last Post: kingauto

Forum Jump:


Users browsing this thread:
2 Guest(s)

Return to TopReturn to Content