Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
R270 read/write eeprom 6WA without desolder
16-01-2019, 09:12 AM,
Post: #11
|
|||
|
|||
RE: R270 read/write eeprom 6WA without desolder
(16-01-2019, 08:08 AM)rickynguyen Wrote:(16-01-2019, 05:40 AM)Spitfire555 Wrote: There is no R270 board which has the 8pin port on delivery. You have to "retrofit" them.Yes, i have this 8 pin port but dont know how to retrofit it, its too long to solder to the external board. cut down along the yellow line! |
|||
16-01-2019, 15:36 PM,
Post: #12
|
|||
|
|||
RE: R270 read/write eeprom 6WA without desolder
(16-01-2019, 09:12 AM)Vojno Wrote:the small board will still working after cut ?(16-01-2019, 08:08 AM)rickynguyen Wrote:(16-01-2019, 05:40 AM)Spitfire555 Wrote: There is no R270 board which has the 8pin port on delivery. You have to "retrofit" them.Yes, i have this 8 pin port but dont know how to retrofit it, its too long to solder to the external board. |
|||
16-01-2019, 16:05 PM,
Post: #13
|
|||
|
|||
RE: R270 read/write eeprom 6WA without desolder
If you do not see the leading thread you cut then yes.
Take a photo from above, but I think there's nothing what you would cut. |
|||
16-01-2019, 17:48 PM,
Post: #14
|
|||
|
|||
RE: R270 read/write eeprom 6WA without desolder
Just cut the corner of the SOIC8 board so it fits next to the cap on the R270 red/blue board. Just insert it on the board and solder it on, then trim the leads if they are too long.
No single R270 is delivered with the SOIC8 board already installed. BTW, you can edit VIN with SOIC test clip but you cannot change the mileage without desoldering. With a good hot air station desoldering and resoldering is a piece of cake If the eeprom is 160D0WQ you possibly can't change mileage even if you were to desolder it. In that case you can change eeprom with a new one but you will get a tamper dot because eeprom serial doesn't match what is stored on the processor of the cluster. If my post was helpful to you please give me a thanks and/or reputation
|
|||
Reputation: +1 - Romanas001 [+1] | |||
16-01-2019, 21:14 PM,
Post: #15
|
|||
|
|||
RE: R270 read/write eeprom 6WA without desolder
i think all 6wa have the eeprom 160d0wq?
|
|||
17-01-2019, 09:16 AM,
Post: #16
|
|||
|
|||
RE: R270 read/write eeprom 6WA without desolder
you have to weld the clamp ..
|
|||
17-01-2019, 13:54 PM,
Post: #17
|
|||
|
|||
RE: R270 read/write eeprom 6WA without desolder
(16-01-2019, 21:14 PM)budddyyy Wrote: i think all 6wa have the eeprom 160d0wq?Yes, its 160D0WQ. How about eeprom in 6WB, same ? |
|||
17-01-2019, 15:05 PM,
Post: #18
|
|||
|
|||
RE: R270 read/write eeprom 6WA without desolder
all 6wa for f10 models can erase vin (only vin) with r270 withoud desoldering or is there any changes in years?
|
|||
17-01-2019, 15:34 PM,
Post: #19
|
|||
|
|||
RE: R270 read/write eeprom 6WA without desolder
You guys without desoldering eeprom taking risk don't be suprsised later if kombi doesn't work properly. Desoldering only takes minutes
|
|||
« Next Oldest | Next Newest »
|
Possibly Related Threads… | |||||
Thread | Author | Replies | Views | Last Post | |
Coapi 2062 trying to FA WRITE | GoNz0- | 0 | 33 |
11 hours ago Last Post: GoNz0- |
|
BMW 420i B48 (2018) EEPROM/full dump | lagunasec | 2 | 82 |
17-04-2024, 17:07 PM Last Post: lagunasec |
|
Eeprom dump needed for EHC E60 | Matthew53 | 0 | 48 |
15-04-2024, 22:27 PM Last Post: Matthew53 |
|
Damaged the EEPROM 95128 in FEM | wxwwxw | 6 | 519 |
08-04-2024, 14:25 PM Last Post: Jumper |
|
BMW MD1/MG1 ISN Extractor from EEPROM Dump | Czozen | 30 | 7,225 |
02-04-2024, 09:01 AM Last Post: megars |
|
Tool for bench read 8hp | Garryq | 9 | 1,659 |
26-03-2024, 09:32 AM Last Post: skywoker |
|
R270 virginise 080D0WQ | thecarfixer | 9 | 591 |
25-03-2024, 19:18 PM Last Post: armenh7 |
|
mini r50 dashboard 3K91D pinout, dash bricked, i need flash and eeprom | matiz | 10 | 1,518 |
22-03-2024, 11:47 AM Last Post: urgi |
|
Tool for OBD read / write ZF 8hp | TIGHTFIN | 7 | 769 |
10-03-2024, 07:46 AM Last Post: syrus |
|
Tool for 35160 eeprom | Emmy67 | 19 | 2,933 |
28-02-2024, 13:44 PM Last Post: Adekborys69 |
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content