[Sanyi85]

HI!

What is the problem? 
I try with ICOM and there is no KL15 voltage (Same in ISTA P) and IFH-0009: ECU not connected or not responding

It is work good with ENET, and DCAN

[willisodhiambo]

Have you used this ICOM before? KL15 only missing in Dr Gini or in INPA too?

[Sanyi85]

Not this, like the same!

I don't try with INPA!

I hope it is only wrong Edibas setup!

[RocketSurgeon]

Is this a Chinese ICOM clone? The missing KL15 is a very common problem on them. I had 2 clones break on me before I bought a Genuine NEXT.

[Sanyi85]

Yes, it is comes from China, but there was no problem earlyer.
I use this version, and it was work earlyer

[RocketSurgeon]

My clones worked fine for a couple months before the issue appeared. First one got the KL15 issue, second one melted a couple components off the board. I combined both broken clones into one working one. It lasted a few months before it too developed the KL15 failure. Unfortunately I don't know how to fix it. I got fed up with clones and bought genuine.

[willisodhiambo]

My clones worked fine for a couple months before the issue appeared. First one got the KL15 issue, second one melted a couple components off the board. I combined both broken clones into one working one. It lasted a few months before it too developed the KL15 failure. Unfortunately I don't know how to fix it. I got fed up with clones and bought genuine.

Yes, his problem is most likely faulty ICOM. I too now have a clone and Genuine. Had enough of those clones. They go faulty a little too often, too easily.