[juve18]

Hello.I have a problem with code off 4x4 in e60 325xi 2006y i remove from cas option $203 and code car but in abs show always communicate transfer box so i change abs pump with diffrent nr and errors gone on dash but if drive 20 km\h show dtcs and error 5E5C and see in live data front wheels if i drive forward front wheels see i drive backward but why i change abs sensor from non xi model and same result what now i must change for correct show in live data ?

[rs@chip]

update ecus with FA changed by proper sw...coding sometimes not inuf

[juve18]

Not coding ? So i must flash all modules? If i change fa and in istaP show me abs orginal replace so i replaced maybe 10 modules of abs and on 1 erros gone but if i drive show again

---

And i have same car same engine and year without 4x4 i change abs from this car to my and error is same so i don't now how to do it must be mechanicaly diffrent

[Silva1337]

if you do not know what to flash you can calculate plan with ista-p than flash with winkpf.
ista will generate depending on VO

[juve18]

I now how to flash and calculate with istap but if ista calculate me new nr for abs and only calculate for exchange i cannot see in winkfp from ista nr and i have newest database so i decided change abs for other nr

---

Old abs cannot reflashing with ista or winkfp must change for other but don't now nr

[rs@chip]

I now how to flash and calculate with istap but if ista calculate me new nr for abs and only calculate for exchange i cannot see in winkfp from ista nr and i have newest database so i decided change abs for other nr

---

Old abs cannot reflashing with ista or winkfp must change for other but don't now nr

Iven if module marked as replacement its 50/50 will work with proper flash..in winkfp you have to use expert mode

[fjord]

Have you seen this?

https://www.e90post.com/forums/showthread.php?t=1557299

[juve18]

Yes but this soft not solve my problem i have mechanicaly fault 4x4