[sra]

You should read the manual... after restore code hu only, not clear v850...

i not understand. did you use Hutool 3.9 Right?

[danyro]

I can help you for free if you have OABR connected to your ZGW.

PM sent with details .
Yes, the evo is connected to zgw from.factory .
No retrofitted unit .

Thanks again!

[danyro]

It seems you have changed your mind meanwhile. 
I pm ed you 2 times but no response . 
I cant understand why you have offered by youself to help and then no answer . Maybe you have your reasons. 
Nevermind, not taken .

Cheers

I can help you for free if you have OABR connected to your ZGW.

[emhtuning]

It seems you have changed your mind meanwhile. 
I pm ed you 2 times but no response . 
I cant understand why you have offered by youself to help and then no answer . Maybe you have your reasons. 
Nevermind, not taken .

Cheers

I can help you for free if you have OABR connected to your ZGW.

FSCmap is a busy guy , remember that it's weekend and people who do this work for living they wait for weekend days to spend time with their family and beloved ones ,,, unless you don't believe in that    .

Sunday is a relaxing day for me , spending it on TV and computer, so if you still need help send me PM and will try to help .

[danyro]

Hey...you understood wrong what i meant to say..very wrong...
Ive contacted him few days ago out of weekend period....i did not ask for help in weekend as i fully understand what you are saying...just waited any sign to wait or not valid offer anymore etc..nothing more
My oppinion is that you just jump in for nothing, based only on assumptions which is not ok in genere..without knowing at all the background

Nevertheless, lets close this subject, much noise for nothing
And again, did not blame fscmap as he is owe me nothing just did not understand his no response

@fscmap - thanks for the offer
Cheers guys

[FSCmap]

Hey...you understood  wrong what i meant to say..very wrong...
Ive contacted him few days ago out of weekend period....i did not ask for help in weekend as i fully understand what you are saying...just waited any sign to wait or not valid offer anymore etc..nothing more
My oppinion is that you just jump in for nothing, based only on assumptions which is not ok in genere..without knowing at all the background

Nevertheless, lets close this subject, much noise for nothing
And again, did not blame fscmap as he is owe me nothing just did not understand his no response

@fscmap - thanks for the offer
Cheers guys

Check your P.M.

My pm mailbox was overloaded, sorry for delay.

[danyro]

updates - no more "description: Service WDBI_PLAIN returned a negative response with response code requestOutOfRange; LinkName: HU_NBT2_63_ETHERNET
severity: ERROR"

Clearing v850/NAND persistency/reflashing the unit will not fix this issue but contrary, can easily brick it.

I used FSCMap's solution for Esys VO lock issue and within minutes i was able to perform a VO Coding.

Above all things, FSCMAP guys really want to help.
useless to say more.

thanks FSCmap for the help

[rickynguyen]

@fscmap: please help me for Esys VO lock issue. i sent you email. please check,tks

[FSCmap]

updates - no more "description: Service WDBI_PLAIN returned a negative response with response code requestOutOfRange; LinkName: HU_NBT2_63_ETHERNET
severity: ERROR"

Clearing v850/NAND persistency/reflashing the unit will not fix this issue but contrary, can easily brick it.

I used FSCMap's solution for Esys VO lock issue and within minutes i was able to perform a VO Coding.

Above all things, FSCMAP guys really want to help.
useless to say more.

thanks FSCmap for the help

Thanks for your feedback. 

[bobie]

Hi guys,
I have similar problem with retrofitted NBT EVO from F30 into my X5 E70.
By mistake I Code FDL with sample FA. After that I lost my CAFD on my UNIT.
Retrieved original correct FA, done "Detect CAF for SWE" and tired to perform just Code.
I'm getting exactly the same result:
I'm using E-SYS 3.27.1 with Premium Launcher and PSdZData 4.16.32 Lite.
----
Caf's suchen
Tal wird generiert
Abarbeitung wird gestartet

TAL execution started.
ExecutionID=2018/06/25-14:08:34.221
[] prepareTALExecution started
[] prepareTALExecution finished
[] prepareVehicleForCoding started
[] prepareVehicleForCoding finished
[HU_NBT2 - 63] prepareECUforCoding started
[HU_NBT2 - 63] prepareECUforCoding finished
[HU_NBT2 - 63] authenticateECUforCoding started
[HU_NBT2 - 63] authenticateECUforCoding finished
[HU_NBT2 - 63 - cafd_00001ef6-006_034_217] Transaction type: cdDeploy; Message: TA started
MCDDiagService<id=62649, job=com.bmw.psdz.jobs.uds.MCD3_PerformECUCoding, service=WDBI_PLAIN - WriteDataByIdentifier with unlimited Data-ID (plain hex value), description=error: negative response : requestOutOfRange, link=HU_NBT2_63_ETHERNET>
[HU_NBT2 - 63 - cafd_00001ef6-006_034_217] Transaction type: cdDeploy; Message: TA finished
[HU_NBT2 - 63] -MessageID is used multiple times, so MessageText may be ambiguous-job failed with negative response error:
code: repeat job
description: Service WDBI_PLAIN returned a negative response with response code requestOutOfRange; LinkName: HU_NBT2_63_ETHERNET
severity: ERROR

[HU_NBT2 - 63] - [Exception - HU_NBT2 - 63] job failed with negative response error:
code: repeat job
description: Service WDBI_PLAIN returned a negative response with response code requestOutOfRange; LinkName: HU_NBT2_63_ETHERNET
severity: ERROR

[HU_NBT2 - 63] prepareECUforCoding started
MCDDiagService<id=230634, job=com.bmw.psdz.jobs.uds.MCD3_PrepareECUforCoding, service=DSC - DiagnosticSessionControl, description=error: negative response : conditionsNotCorrect, link=HU_NBT2_63_ETHERNET>
[HU_NBT2 - 63] prepareECUforCoding finished
[HU_NBT2 - 63] authenticateECUforCoding started
MCDDiagService<id=16727, job=com.bmw.psdz.jobs.uds.MCD3_AuthenticateECUforCoding, service=SA_SK - SecurityAccessSendKey, description=error: negative response : serviceNotSupportedInActiveSession, link=HU_NBT2_63_ETHERNET>
[HU_NBT2 - 63] There was an error during TAL execution, please check the log files.
[HU_NBT2 - 63] There was an error during TAL execution, please check the log files.
[HU_NBT2 - 63] - [Exception - HU_NBT2 - 63] job failed with negative response error:
code: service returned global negative response
description: Service SA_SK returned a negative response with response code serviceNotSupportedInActiveSession; LinkName: HU_NBT2_63_ETHERNET
severity: ERROR

[HU_NBT2 - 63] finalizeECUCoding started
[HU_NBT2 - 63] finalizeECUCoding error
[HU_NBT2 - 63] There was an error during TAL execution, please check the log files.
[HU_NBT2 - 63] - [Exception - HU_NBT2 - 63] job failed with negative response error:
code: exception in job
description: MCD3_FinalizeECUCoding threw java.lang.NoSuchFieldError: WRITE_NCD_ERROR; LinkName: HU_NBT2_63_ETHERNET
severity: FATAL ERROR

[] There was an error, please check the log files.
[] - [Exception - HU_NBT2 - 63] job failed with negative response error:
code: service returned global negative response
description: Service SA_SK returned a negative response with response code serviceNotSupportedInActiveSession; LinkName: HU_NBT2_63_ETHERNET
severity: ERROR

[] finalizeVehicleCoding started
[] finalizeVehicleCoding finished
[] finalizeTALExecution started
[] finalizeTALExecution finished
TAL execution finished
TAL-Execution finished with status: "FinishedWithError". [C207]
TAL execution finished. Duration: "13s". [C206]
Abarbeitung beendet