[kuki88]

Hello
I have a bmw m6 2013 in the No. 2 engine driver I have an error all the time
"1f2112 Function enable, powerincrease 2; not occured"


Ista d does not show any solution except for the replacement of the No. 2 driver


I am blaming the No. 2 driver, but the error remains the car is not full power

does anyone have any idea to solve my problem? 

Thanks.

[RocketSurgeon]

You are probably looking at a DME replacement here, but I might try to program and encode the DME just to try it.
I've had some very strange problems resolved by programming and encoding a module.

What is the background on this car? Did this issue pop up, or did you get the vehicle with this issue. Is it possible that a DME was replaced?

[kuki88]

Thanks
I got a vehicle with this problem I do not really have a place to take a new DME
I will add that the car has chip tuning


Thanks

[kuki88]

can I change the last date of programming so I can program the ECU from ISTAp because now I have a message that programming is possible only with ista +

[RocketSurgeon]

The last version of ISTA-P to work on F-chassis is like 3.64, which puts you at F010-17-11. If your i-step is newer than that, ISTA+ is your only option.
ISTA+ works great for programming if you have ICOM.
Esys also works well for flashing.
If you have an ICOM, you have lots of options for flashing. If you are using ENET, I would only use ESYS.
Keep in mind that programming will wipe out any tunes, which might get strange with 2 DMEs.

[kuki88]

Thanks for explaining
I programmed the drivers via istap but the program asks me to import access codes for the full engine power
from where I can take these codes?

Thanks

[RocketSurgeon]

Ask on the forum for an "FSC repair pack" using your VIN. Somebody with BMW access can give you all of the enabling codes for your car.

[kuki88]

if the lack of Fsc code can cause a mistake and lack of power?

[larshutten]

Yes, if FSC codes are missing you can get strange behaviour if car is flashed for PPK. Just post VIN of PM and will check if there are FSC codes for that vin number.

[kuki88]

Hello when you try to enter fsc by ista p gets error file damaged.


Thanks.