[Commander]

hi I looking for drivers to win 7 64 
consult 3    v72
interface VI 
but after connect to usb - unknown device ,no drivers ---  try update -  nothing 

any idea ?????

[rightpcb]

I think only work on XP with VI interface ?

[Commander]

Software working ok
But my laptop can't find driver for the interface

[Renopower]

Use 32 bit and all works

[Commander]

Hi
I try run on 32bit and the same, drivers problems

[mattydr67]

First of all I don't know if Alliance VI will work with Consult 3+ version but you can try.
If you cannot install the drivers manually then an easy way is that in a Win 7 32bit system install Renault Can Clip software and then plug the interface to the car and to the usb and you will install the drivers. Maybe you need to do this manually. But after your tool drivers will be installed you have to install the Consult 3+ software.
Well in the end you will need to do all the setting to make the Alliance VI to work with Consult 3+ version
Good luck

[Commander]

It's my interface

[rightpcb]

Do you want to use with NC+ or NC, as mattydr67 said not sure the "plus" will not work with the VI and the NC (non plus) will only work on XP

[Commander]

hi , please  for share 
CONSULT 3      software version  09.021.018. 

My copy have error - files missing 

thanks

[tuncel]

It's my interface

this interface how is work nissan. can you share software pls...