Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
EDC15P+ locked up can not read and write
18-01-2019, 13:21 PM,
Post: #1
|
|||
|
|||
EDC15P+ locked up can not read and write
Hi Guys
i have here a EDC15P+ ECU i can not write or read ECU. No connection to ECU with VCDS, VAG Commander, MPPS, KESS V2 I have removed the ECU and tried to read about Kess... not read. prehistory: I tried to flash a crypted flash on the ECU. After that the engine did not start anymore. Then I played back the original flash on it but the engine still does not start and the connection to the ECU does not work anymore. What can i do??? I have : -MPPS -KESS V2 -VCDS -VCP -VAG Commander Please HELP Guys |
|||
18-01-2019, 13:28 PM,
Post: #2
|
|||
|
|||
RE: EDC15P+ locked up can not read and write
Use boot mode with ori flash.
|
|||
18-01-2019, 13:36 PM,
Post: #3
|
|||
|
|||
RE: EDC15P+ locked up can not read and write
|
|||
18-01-2019, 13:48 PM,
(This post was last modified: 18-01-2019, 13:54 PM by darek_naprawa.)
Post: #4
|
|||
|
|||
RE: EDC15P+ locked up can not read and write
Use google.
I Procedure: MPPS recovery Procedure REPROG slow with the generic driver, following the instructions MPPS off, put pin 24 to ground (see photo) turn off pin 24 then ok start downloading finally after it is finished downloading cut Power supply about 5s, turning to ground plug 24, |Use mpps generic/ |
|||
Reputation: +2 - raffy haddad [+1] , kastanka [+1] | |||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content