[mrbla]

It depends with the adaption.
I flashed the diagnose gateway of my car. And it was necessary to made changes to adaption afterwards. But I guess for bcm this shouldn’t be the case

[apoelistas]

I have flashed audi gateway more than 4 times. No such issue. 

Extra info removed.

The other answer flash sgo icon on the previous posted photo (the file could be frf or sgo)

[5.1]

Hello Sébastien,

When you look at the PDF VCP you see the cursor point it to PCR2.1 EEP and not to Flasg SGO.

Look at the attachment, so what do i need to use!

Hello,

Normally, on the welcome screen, you can choose whatever components you want to work with. I think "Central Electrics" is not displayed yet. You have to choose "More" and look from there. It's number "9" IIRC.

Did you try?

Once you are in "Central Electric", press connect > flasher > open file > Choose desired "*.frf"file to flash > click "flash ".sgo"

What you see in the pdf's example is just for this specific ECU.

If you feel unsure, let me know, tomorrow morning, i'll go iin my car, plug VCP and do a BCM flash simulation for you and save a few screenshots... 

Good luck...


Sébastien.

[cebbes30]

Hello Sébastien,

If you want to do that for me thanks veryy much.

And can you ore some one else can tell.

I have now parkassist version A, can i flash with a latest version.
Some of them have PLA 3.0 like C this will not work but D version will this work.

Address 10: Park/Steer Assist (J791) Labels 5Q0-919-298.clb
Part No SW: 5Q0 919 298 A HW: 5Q0 919 298

[apoelistas]

which ones do have same hardware number 5Q0 919 298 (without suffix). This is the answer.

Second way.
Checking flashdaten disk here is the latest for your SW:
FL_5Q0919298A_0029

If you have firmware lower than 0029 then this would be the best and quickest way to update. You did not disclose the whole VCDs scan so I cannot see what firmware you have.

[5.1]

Hello Sébastien,

If you want to do that for me thanks veryy much.

And can you ore some one else can tell.

I have now parkassist version A, can i flash with a latest version.
Some of them have PLA 3.0 like C this will not work but D version will this work.

Address 10: Park/Steer Assist (J791)       Labels 5Q0-919-298.clb
Part No SW: 5Q0 919 298 A    HW: 5Q0 919 298

Hello 


Check the attached file, it includes a link to the pictures i took from the process...

Basically: Open VCP > Click "More" > "Confort" > "Central Electric" > "Flasher" > "Open File" > Choose "VAS Firmware" and select your file .frf / .sgo > Press "Flash .sgo" > Wait...

I can't help you further regarding the best version to flash. I think @apoelistas got your back on this matter. Let me know if you have another question, but i guess you'll be fine now...
 
Good luck..!


Sébastien.

[cebbes30]

Hello apoelistas,

This is now in my car.

Address 10: Park/Steer Assist (J791)       Labels 5Q0-919-298.clb
   Part No SW: 5Q0 919 298 A    HW: 5Q0 919 298
   Component: PARKHILFE PLA 011 0029 
   Revision: --------    Serial number: 61131226402555
   Coding: 0031161041
   Shop #: WSC 01357 011 00200
   ASAM Dataset: EV_EPHVA2CAU3700000 003014
   ROD: EV_EPHVA2CAU3700000_003.rod
   VCID: 3D5E639CACD750A2F0-8068
No fault code found.

which ones do have same hardware number 5Q0 919 298 (without suffix). This is the answer.

Second way.
Checking flashdaten disk here is the latest for your SW:
FL_5Q0919298A_0029

If you have firmware lower than 0029 then this would be the best and quickest way to update. You did not disclose the whole VCDs scan so I cannot see what firmware you have.

---

Thanks…..

Hello Sébastien,

If you want to do that for me thanks veryy much.

And can you ore some one else can tell.

I have now parkassist version A, can i flash with a latest version.
Some of them have PLA 3.0 like C this will not work but D version will this work.

Address 10: Park/Steer Assist (J791)       Labels 5Q0-919-298.clb
Part No SW: 5Q0 919 298 A    HW: 5Q0 919 298

Hello 


Check the attached file, it includes a link to the pictures i took from the process...

Basically: Open VCP > Click "More" > "Confort" > "Central Electric" > "Flasher" > "Open File" > Choose "VAS Firmware" and select your file .frf / .sgo > Press "Flash .sgo" > Wait...

I can't help you further regarding the best version to flash. I think @apoelistas got your back on this matter. Let me know if you have another question, but i guess you'll be fine now...
 
Good luck..!


Sébastien.

[apoelistas]

Parking distance control unit has different hardware depending if it has rear and or front and or graphical display support. You should not be in a hurry to flash with any firmware.

The only firmwares (SW) available are:
FL_5Q0919298A_0029
FL_5Q0919298D_0042
FL_5Q0919298K_ 0541 or 0542
FL_5Q0919298L_0132

Go to etka search what are given as replacement part no for your module.

Check if one of those is same as above.
If not no firmware update

If yes check their HW number if same. (Google vcds logs ebay photos ).

Needs research if you are not happy with 0029.

Cannot do the work for you because I dont have etka VW, and searching google and ebay takes time.

Otherwise if you know the control module TPI which gives an SVM and writes the information in question that will be even easier (ERWIN). This is what dealer does.

[iyade46]

clone vag can pro can work as original?

[5.1]

clone vag can pro can work as original?

Hello,

Clone is Version 5.5.1. Genuine is actualy Version 8.x 

You are limited with some tasks, but it can be used to flash some cars components. Has some guided functions, but again, limited...

What do you need VCP for?

Cheers...


Sébastien.