Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

DPFoff Peugeot 307HDI EDC15C2
20-01-2019, 16:37 PM,
Post: #1
PPeugeot  DPFoff Peugeot 307HDI EDC15C2
Hi to all. I need DPF off Peugeot 307 2.0HDI engine RHS ecu Bosch EDC15C2
HW 0281010779
SW 1037353725
PLease only tested solutions. Many thanks and regards.


Attached Files
EDC15C2 0281010779.zip
File Type: .zip
Downloaded: 29 times
Size: 199.02 KB

Quote this message in a reply
[+] 1 user says Thank You to Marines74 for this post
20-01-2019, 16:43 PM,
Post: #2
RE: DPFoff Peugeot 307HDI EDC15C2
here you go.

DPF OFF 

regards handshake


Attached Files
(Peugeot 307 (DPF OFF) - 353725).rar
File Type: .rar
Downloaded: 24 times
Size: 159.18 KB

Quote this message in a reply
[+] 2 users say Thank You to FlashBack for this post
20-01-2019, 16:45 PM,
Post: #3
RE: DPFoff Peugeot 307HDI EDC15C2
Full delete DPF, and right CS


Attached Files
WinOLS (Peugeot 307 (noDPF_okCS) - 353725).rar
File Type: .rar
Downloaded: 17 times
Size: 159.31 KB

Quote this message in a reply
[+] 1 user says Thank You to Strellson for this post
20-01-2019, 17:00 PM,
Post: #4
RE: DPFoff Peugeot 307HDI EDC15C2
(20-01-2019, 16:45 PM)Strellson Wrote:  Full delete DPF, and right CS

What about pass Mate?
Quote this message in a reply
20-01-2019, 20:31 PM,
Post: #5
RE: DPFoff Peugeot 307HDI EDC15C2
hey buddy,

here your file.

Tell me, perform the file?
Good or bad?

Pass in PM!
Thanks + Reputation!!! 

Thx for your rate!


Attached Files
WinOLS (Peugeot 307 (DPF OFF CSOK) - 353725) - Orange_99.rar
File Type: .rar
Downloaded: 8 times
Size: 159.63 KB


[Image: 2000px-Instagram_logo_2016.svg.png]   Follow me on Instragam! --> Chiptuning_NRW [Image: 384px-Skype-for-Business.svg.png] --> live:chiptuning.nrw
Press the [Image: postbit_reputation.gif] [Image: tyl_add.png] buttons if you find my post helpful   rofl Or You can HTML tutorial yikes 

KTAG 7.026 EU - KESS 5.017/2.47 EU
Quote this message in a reply
28-01-2019, 19:49 PM,
Post: #6
RE: DPFoff Peugeot 307HDI EDC15C2
(20-01-2019, 20:31 PM)Orange_99 Wrote:  hey buddy,

here your file.

Tell me, perform the file?
Good or bad?

Pass in PM!
Thanks + Reputation!!! 

Thx for your rate!

Hi mate. On your file engine does not start and no communication with ECU. Now i have to desolder flash to write other file. Please if you are not sure of your solution do not post it.
Quote this message in a reply
29-01-2019, 23:24 PM, (This post was last modified: 29-01-2019, 23:26 PM by no_name.)
Post: #7
RE: DPFoff Peugeot 307HDI EDC15C2
(28-01-2019, 19:49 PM)Marines74 Wrote:  
(20-01-2019, 20:31 PM)Orange_99 Wrote:  hey buddy,

here your file.

Tell me, perform the file?
Good or bad?

Pass in PM!
Thanks + Reputation!!! 

Thx for your rate!

Hi mate. On your file engine does not start and no communication with ECU. Now i have to desolder flash to write other file. Please if you are not sure of your solution do not post it.

Why do you desolder it, when even kess can do it, and galletto, and Ktag also
use this infos

Code:
Connect pin 24 29f400 to GND.
Power ON ECU.
After 3-5 sec disconnect pin 24 from GND.
Connect Galleto socket.
Start Galleto program.
Select AUDI.
In Driver go to bottom and find AUDI WV ME7.x.x 29f400BB PIN 24 FLASH A MASSA
Press ECU DATA button and check answer.
If you see "Boot mode inactive" you have Galleto USB driver trouble. Often this is conflict Galleto USB driver and drivers from other program for virtual USB COM port. Tray to uninstall all other USB COM drivers.
If you see EEPROM ident all OK.
First read flash few time and binary compare files for check connection stability. If OK - you can write.
------------------------------------------------------------------------------------------------------------
Ok if that helps someone.....Today i did boot mode with ECU on the car and it works.Car is Peugeot 406 Coupe 2.2HDi 2004 year EDC15C2
1.I removed the battery negative.
2.Turned ignition ON.
3.Conected MPPS to car EOBD and started the software.
4.Then opened the ECU casing.
5.After that conected the boot pin to 29F400 and my friend conected the negative terminal.I waited 5 second with boot cable ( 5kOm ) then removed boot cable.
6.Choosed in MPPS General - Me7.XXX writing ok.All was fine.Tried this procedure for reading and was fine ,too.
I hope this helps someone  :)
------------------------------------------------------------------------------------------------------------
Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  Peugeot Partner EDC17C60 Adblue off autoraedarum 7 118 Yesterday, 13:09 PM
Last Post: autoraedarum
PPeugeot Scr Peugeot 508 Anissem78 5 131 Yesterday, 13:05 PM
Last Post: Anissem78
  peugeot 206 1.4 hdi EGR OFF ioura 1 24 Yesterday, 06:31 AM
Last Post: Ryzen
  Peugeot 407sw sid 803a tinaca 1 31 26-03-2024, 22:44 PM
Last Post: rece1p23
PPeugeot peugeot 207 1.4ess 2012 Valeo V34.1 dcat anour10 2 188 26-03-2024, 11:42 AM
Last Post: anour10
  Peugeot 3008 MD1CS003 adblue, dpf mislav 1 37 25-03-2024, 14:47 PM
Last Post: DSESET86
  Peugeot 308 T9 1.6HDi EDC17C60 EGR OFF Tekero 1 37 25-03-2024, 07:58 AM
Last Post: Jurebv
PPeugeot help connectors adblue peugeot 2008 edc17c60 manueldord 6 179 21-03-2024, 21:27 PM
Last Post: Jurebv
  Peugeot Partner 1.6hdi edc16c34 stage1 Lifestyle 4 306 18-03-2024, 07:27 AM
Last Post: Lifestyle
1Iveco iveco 35C13 DPFOFF spoool 6 159 14-03-2024, 10:34 AM
Last Post: spoool

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content