Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Solved ✔ EDC17C54 Clone Ktag Micro protection removal failed
20-01-2019, 23:21 PM,
(This post was last modified: 21-01-2019, 17:36 PM by Clusters.)
Post: #1
|
|||
|
|||
EDC17C54 Clone Ktag Micro protection removal failed
ECU:
EDC17C54 HW H24 03L907309AC 0281011903 Tried reading it with cloned Kess, brings an error message that the wrong diver is used to read the ECU. Any help would be appreciated! |
|||
21-01-2019, 00:15 AM,
(This post was last modified: 21-01-2019, 00:21 AM by teerak2uk.)
Post: #2
|
|||
|
|||
RE: EDC17C54 Clone Ktag Micro protection removal failed
what protocol you using with ktag
Description Current product Original equipment (OE) 0281011903 Designation Control unit, diesel injection Production discontinuation 09/2007 Type formula EDC 16U1-5.41 Product information Unit reparable " www.bosch-repair-service.com " Article status Discontinued item according to that bosch number its an edc16u1 not edc17 |
|||
21-01-2019, 04:28 AM,
Post: #3
|
|||
|
|||
RE: EDC17C54 Clone Ktag Micro protection removal failed
you need to read in boot mode
|
|||
21-01-2019, 05:46 AM,
Post: #4
|
|||
|
|||
RE: EDC17C54 Clone Ktag Micro protection removal failed
Clone KESS don’t read/write this ECU
Only original or ktag |
|||
21-01-2019, 11:34 AM,
Post: #5
|
|||
|
|||
RE: EDC17C54 Clone Ktag Micro protection removal failed
I read write with my ktag reworked by me....
|
|||
21-01-2019, 14:11 PM,
(This post was last modified: 21-01-2019, 14:14 PM by fiz_lth.)
Post: #6
|
|||
|
|||
RE: EDC17C54 Clone Ktag Micro protection removal failed
(21-01-2019, 00:15 AM)teerak2uk Wrote: what protocol you using with ktag Bosch number has a typo it was smudged during removal. Correct number is 0281017903 and it is definitely EDC17C54 (21-01-2019, 05:46 AM)Strellson Wrote: Clone KESS don’t read/write this ECU With Ktag I get Micro Protection Removal Failed. And with Kess in Boot mode I get wrong protocol selected. Both Kess and Ktag are reworked by me and normally works with all other ECU's |
|||
21-01-2019, 15:40 PM,
(This post was last modified: 21-01-2019, 15:46 PM by Strellson.)
Post: #7
|
|||
|
|||
RE: EDC17C54 Clone Ktag Micro protection removal failed
|
|||
Reputation: +1 - fiz_lth [+1] | |||
21-01-2019, 16:23 PM,
Post: #8
|
|||
|
|||
RE: EDC17C54 Clone Ktag Micro protection removal failed
Problem SOLVED!
I was able to read this ECU as EDC17C64 GPT |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content