Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Ista D 4.10.20 failed to start
22-01-2019, 04:14 AM,
(This post was last modified: 22-01-2019, 04:16 AM by rickynguyen.)
Post: #1
|
|||
|
|||
Ista D 4.10.20 failed to start
Followed the instruction in FAQ file but start failed, tried to removed and installed many times but nil help, what was i wrong ?
Pictures attached is all i installed. Ediabas installed in c:\ Rheingold installed in c:\ SQliteDBs unziped to c:\Rheingold\ |
|||
22-01-2019, 08:11 AM,
Post: #2
|
|||
|
|||
RE: Ista D 4.10.20 failed to start
(22-01-2019, 04:14 AM)rickynguyen Wrote: Followed the instruction in FAQ file but start failed, tried to removed and installed many times but nil help, what was i wrong ? Did you unblock all files before extract? Check registry settings. |
|||
22-01-2019, 08:26 AM,
Post: #3
|
|||
|
|||
RE: Ista D 4.10.20 failed to start
what about BLP/SDP ? did you extract `em or disable it in gui config ?
|
|||
22-01-2019, 23:48 PM,
(This post was last modified: 22-01-2019, 23:51 PM by rickynguyen.)
Post: #4
|
|||
|
|||
RE: Ista D 4.10.20 failed to start
(22-01-2019, 08:11 AM)Twoone Wrote:Yes, removed “read only” before extract(22-01-2019, 04:14 AM)rickynguyen Wrote: Followed the instruction in FAQ file but start failed, tried to removed and installed many times but nil help, what was i wrong ? (22-01-2019, 08:26 AM)timelord Wrote: what about BLP/SDP ? did you extract `em or disable it in gui config ?I use ISTA-D for diagnostic only, so i dont download BLP/SDP. Correct me if i was wrong. Does BLP/SDP required for ISTA-D start normally ? |
|||
23-01-2019, 00:49 AM,
(This post was last modified: 23-01-2019, 00:50 AM by BMWS1000RR.)
Post: #5
|
|||
|
|||
RE: Ista D 4.10.20 failed to start
(22-01-2019, 23:48 PM)rickynguyen Wrote:(22-01-2019, 08:11 AM)Twoone Wrote:Yes, removed “read only” before extract(22-01-2019, 04:14 AM)rickynguyen Wrote: Followed the instruction in FAQ file but start failed, tried to removed and installed many times but nil help, what was i wrong ? If you have downloaded Spider80 Standalone install package ? you have created the PATH incorrectly. It is C:\BMW\Rheingold\ *_* See picture attached with the wording from the FAQ-EN.PDF If this solves your problem feel free to thank my button and REP me. |
|||
23-01-2019, 07:45 AM,
Post: #6
|
|||
|
|||
RE: Ista D 4.10.20 failed to start
(22-01-2019, 23:48 PM)rickynguyen Wrote:BLP needed!!!(22-01-2019, 08:11 AM)Twoone Wrote:Yes, removed “read only” before extract(22-01-2019, 04:14 AM)rickynguyen Wrote: Followed the instruction in FAQ file but start failed, tried to removed and installed many times but nil help, what was i wrong ?
|
|||
23-01-2019, 09:45 AM,
(This post was last modified: 23-01-2019, 09:55 AM by rickynguyen.)
Post: #7
|
|||
|
|||
RE: Ista D 4.10.20 failed to start
U
(23-01-2019, 00:49 AM)BMWS1000RR Wrote:I tried but still same errors(22-01-2019, 23:48 PM)rickynguyen Wrote:(22-01-2019, 08:11 AM)Twoone Wrote:Yes, removed “read only” before extract(22-01-2019, 04:14 AM)rickynguyen Wrote: Followed the instruction in FAQ file but start failed, tried to removed and installed many times but nil help, what was i wrong ? (23-01-2019, 07:45 AM)Shinoby Wrote:BLP downloaded and unzip to instruction folder but still same errors(22-01-2019, 23:48 PM)rickynguyen Wrote:BLP needed!!!(22-01-2019, 08:11 AM)Twoone Wrote:Yes, removed “read only” before extract(22-01-2019, 04:14 AM)rickynguyen Wrote: Followed the instruction in FAQ file but start failed, tried to removed and installed many times but nil help, what was i wrong ? |
|||
23-01-2019, 10:48 AM,
Post: #8
|
|||
|
|||
RE: Ista D 4.10.20 failed to start
And value to registry added?
|
|||
23-01-2019, 14:20 PM,
(This post was last modified: 23-01-2019, 23:37 PM by Lemta.)
Post: #9
|
|||
|
|||
RE: Ista D 4.10.20 failed to start
(23-01-2019, 07:45 AM)Shinoby Wrote:(22-01-2019, 23:48 PM)rickynguyen Wrote: I use ISTA-D for diagnostic only, so i dont download BLP/SDP. Correct me if i was wrong.BLP needed!!! @Shinoby I've been told BLP not required for diagnostic only. There seems to be lots of conflicting information regarding this. Anyway, I have installed without BLP and ISTA starts fine - I have only done fault scans so I don't know whether things such as headlight calibration works or not. Can you clarify what would not work without BLP, Shinoby? |
|||
24-01-2019, 09:23 AM,
Post: #10
|
|||
|
|||
RE: Ista D 4.10.20 failed to start
(23-01-2019, 10:48 AM)inspi1981 Wrote: And value to registry added?Yes, run the x64.reg file to added registry. Still error |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content