Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Fiat Punto 1.9 100hp EDC16c8 remap help
22-01-2019, 20:36 PM,
Post: #1
|
|||
|
|||
Fiat Punto 1.9 100hp EDC16c8 remap help
Hello, can anyone help me with this file? Problem what is injection quantity somewhere limited to 70mm3. I need it to be 85mm3.
Also need damos or mappack for this file. |
|||
23-01-2019, 01:41 AM,
(This post was last modified: 23-01-2019, 08:05 AM by D1971.)
Post: #2
|
|||
|
|||
RE: Fiat Punro 1.9 100hp EDC16c8 remap help
(22-01-2019, 20:36 PM)djakon999 Wrote: Hello, can anyone help me with this file? Problem what is injection quantity somewhere limited to 70mm3. I need it to be 85mm3. Hire it is at 85. But, (just my only friendly view) this tun job is aggressive for engine and transmision. Turbo pressure in peaks inc +500 mbar (+900 mbar in low)? I doubt it's okay. Torq lim. for1st gear and for rew gear inc +160%, soon it will destroy gearbox, clutch, or both. Also some other things are.... Basically, tuner does not have to change every map, to do his job nicely. I think it depends on what he want to get as a final product. For me; power without control = nothing. And making a "paper car" = a car that seems lighter, at the final, it mean a success job. This means, that tuned car accelerate smooth, use all power all time and do not slip on every throttle touching. Again I say, all this is only my friendly opinion. I am old fashion and I learned from the "soft tuners" and from the mistakes of these "hard ones". And also I am the old man now and I have no more courage Wish you good work. hire it is your file pass is in PM |