Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

BMW F11 2014 how to read DDE 520D N47T
28-01-2019, 14:52 PM,
Post: #1
BMW F11 2014 how to read DDE 520D N47T
For a BMW F11 2014 520D with engine code N47T p/n 8577764 I would like to remove egr.
I have KessV2 K-tech clone. What possibilities do I have to read out the ecu? Do I need to open the cover? The ecu has already be chipped by a tuner.

Bosch 0 281 030 759

MGU virgin and patching in Europa.
Secure coding 2.0
Feature installer codes
Quote this message in a reply
28-01-2019, 14:59 PM,
Post: #2
RE: BMW F11 2014 how to read DDE 520D N47T
Read/write with opening ecu. I know that autotuner can read/write without taking out ecu but there is virtual read... Bdm read/write best solution for f-series ecu.
Quote this message in a reply
[+] 1 user says Thank You to ltujustas for this post
28-01-2019, 20:13 PM, (This post was last modified: 28-01-2019, 20:13 PM by Enabled.)
Post: #3
RE: BMW F11 2014 how to read DDE 520D N47T
That is EDC17C50 right?
KTAG GPT boot mode works well, opening dde is not too bad. I have done a lot on personal car with this dde.
Quote this message in a reply
[+] 1 user says Thank You to Enabled for this post
28-01-2019, 23:02 PM,
Post: #4
RE: BMW F11 2014 how to read DDE 520D N47T
How can I check if it is EDC17C50?
What version of KTAG should be used? I'll post tomorrow a list what ecu's are supported of the KTAG version I'm using.

MGU virgin and patching in Europa.
Secure coding 2.0
Feature installer codes
Quote this message in a reply
29-01-2019, 00:02 AM, (This post was last modified: 29-01-2019, 00:04 AM by Enabled.)
Post: #5
RE: BMW F11 2014 how to read DDE 520D N47T
RealOEM says it is DDE7.01, so that should be EDC17C50. Easy.

I use KTAG 7.020, with K-Suite 2.23.

(If by any chance it is DDE7.31, then that is a very difficult to open EDC17CP45.)
Quote this message in a reply
29-01-2019, 10:23 AM,
Post: #6
RE: BMW F11 2014 how to read DDE 520D N47T
(28-01-2019, 23:02 PM)Fx82 Wrote:  How can I check if it is EDC17C50?
What version of KTAG should be used? I'll post tomorrow a list what ecu's are supported of the KTAG version I'm using.

Post label attached on ECU.

If  I helped you press magic buttons  clapping
Quote this message in a reply
01-02-2019, 01:13 AM,
Post: #7
RE: BMW F11 2014 how to read DDE 520D N47T
Let me get a picture of it.

MGU virgin and patching in Europa.
Secure coding 2.0
Feature installer codes
Quote this message in a reply
01-02-2019, 01:21 AM,
Post: #8
RE: BMW F11 2014 how to read DDE 520D N47T
Your part number from above, Googled, shows it as the 2 connector (1 large, 1 small) EDC17C50.
Quote this message in a reply
03-02-2019, 23:43 PM, (This post was last modified: 04-02-2019, 01:49 AM by Clusters.)
Post: #9
RE: BMW F11 2014 how to read DDE 520D N47T

(01-02-2019, 01:21 AM)Enabled Wrote:  Your part number from above, Googled, shows it as the 2 connector (1 large, 1 small) EDC17C50.

Here is a picture of the numbers from the ecu.
   

MGU virgin and patching in Europa.
Secure coding 2.0
Feature installer codes
Quote this message in a reply
04-02-2019, 15:44 PM,
Post: #10
RE: BMW F11 2014 how to read DDE 520D N47T
I've succeeded in reading the EDC17C50 ecu  yes
Thanks all for the help  handshake

MGU virgin and patching in Europa.
Secure coding 2.0
Feature installer codes
Quote this message in a reply
[+] 1 user says Thank You to Fx82 for this post


Possibly Related Threads…
Thread Author Replies Views Last Post
JFiat FIAT EDC16C39 read/write isamyku 2 140 5 minutes ago
Last Post: boby1979
  How to read TOYOTA 2ADFHV kantusjack 0 13 9 hours ago
Last Post: kantusjack
YTMercedes mb sprinter 2.2cdi 2014 need dpf,adblue egr off tiugrikas 1 28 Yesterday, 11:24 AM
Last Post: Jurebv
  Need Virtual Read for Kess2 EDC17CP14 Moldovan1 1 60 Yesterday, 06:43 AM
Last Post: loki954
VToyota TOYOTA CORROLLA 2014 CAT DELETE kojoantwi 0 60 22-04-2024, 15:55 PM
Last Post: kojoantwi
KOpel Tool to read Denso Isuzu Opel Corsa ECUs MasterMulder 3 104 18-04-2024, 09:18 AM
Last Post: MasterMulder
  How to read ME 3.1.1 stjansdal 2 91 01-04-2024, 11:54 AM
Last Post: stjansdal
  2014 Mercedes E250 CDI, stage 1 on ECO switch off sparky001 0 54 30-03-2024, 05:38 AM
Last Post: sparky001
ZTAudi ME7.1.1 8E0910560J full read needed Andreis 0 69 18-03-2024, 19:40 PM
Last Post: Andreis
ZVW 1.8T AUM Bora Stage 1 read out and flash? Speedy_07 3 138 11-03-2024, 09:52 AM
Last Post: Elijah

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content