Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Steps To Swap Used ECU into B8 Audi (immo 5)
28-01-2019, 18:20 PM,
Post: #1
|
|||
|
|||
Steps To Swap Used ECU into B8 Audi (immo 5)
Could someone outline the Steps To Swap Used ECU into B8 Audi (immo 5)?
The only equipment I currently have is VCDS and as I understand the eeprom dump tools no longer work for the immo 5 vehicles. Also wondering if the eeprom is standalone or integral to another chip as I could just unsolder it from the board if possible. |
|||
28-01-2019, 18:24 PM,
Post: #2
|
|||
|
|||
RE: Steps To Swap Used ECU into B8 Audi (immo 5)
(28-01-2019, 18:20 PM)Jasondmx2 Wrote: Could someone outline the Steps To Swap Used ECU into B8 Audi (immo 5)? You need to post more detail like ecu type then someone will help you. All VAG immo off or transfer - change Power Class up to & including WFS6 SHE -VAG DCM 6.2 3.7 - immo off also Bcm2, Elv, TC DSG DL381 DQ200 DQ250 DQ400 DQ500: Here:
AKL MQB - + A6-A7-A8-Touareg- generate sync key file - Many tools available = VAG ME7x LC AL NLS offline MOD tool + kg- BMW EDC16 IMMO TOOL + KG - BMW EWS remover tool + KG - med17 immo v2.3 - BMW-LAND ROVER-MINI EWS OFF TOOL + many more sw: PM me with what you need. |
|||
29-01-2019, 01:01 AM,
(This post was last modified: 29-01-2019, 01:12 AM by Jasondmx2.)
Post: #3
|
|||
|
|||
RE: Steps To Swap Used ECU into B8 Audi (immo 5)
It is a Bosch ECU in a 2013 A5
part # 8k5907115c It is a Bosch ECU in a 2013 A5 part # 8k5907115c It looks like this is the med17 or edc17? |
|||
29-01-2019, 17:57 PM,
Post: #4
|
|||
|
|||
RE: Steps To Swap Used ECU into B8 Audi (immo 5)
You can probably clone the original ecu into the used one with a tuning interface like KTAG.
Part number leads to MED17. Boot mode tricore clone is easiest. You should not desolder anything. |
|||
29-01-2019, 22:22 PM,
(This post was last modified: 29-01-2019, 22:32 PM by Jasondmx2.)
Post: #5
|
|||
|
|||
RE: Steps To Swap Used ECU into B8 Audi (immo 5)
(29-01-2019, 17:57 PM)Enabled Wrote: You can probably clone the original ecu into the used one with a tuning interface like KTAG. Sounds good. Is there any guaranteed equipment/method to read/write all versions of the MED 17 via OBD2 or is the only option to open most of these ECU to use Ktag? I'm seeing a lot of issues with chip version etc. and would like to invest in some equipment that will work across other platforms. Maybe mpps v18? or FGTech Galletto V54 In this particular case lifting the tricore and soldering to new board is an option if all the immo date is on the chip. |
|||
29-01-2019, 23:20 PM,
Post: #6
|
|||
|
|||
RE: Steps To Swap Used ECU into B8 Audi (immo 5)
(29-01-2019, 22:22 PM)Jasondmx2 Wrote:(29-01-2019, 17:57 PM)Enabled Wrote: You can probably clone the original ecu into the used one with a tuning interface like KTAG. For EDC/MED17 clone you must open and read eeprom + flash by ktag, fgtech, mpps18.... But clone ecu not always work plug and play some days ago a user had problems on clone ecu for golf 6 |
|||
06-02-2019, 11:22 AM,
Post: #7
|
|||
|
|||
RE: Steps To Swap Used ECU into B8 Audi (immo 5)
hello check here
https://info.autokey.by/index.php |
|||
06-02-2019, 19:59 PM,
Post: #8
|
|||
|
|||
RE: Steps To Swap Used ECU into B8 Audi (immo 5)
In case of Immo 5 i dont know a solution for cloning ECU's. I think the problem is in CS - you need to read last byte from working key. AVDI have a solution, but only for programming in the car. This is only way at this moment, i think. I hope i am wrong... Can someone confirm?
|
|||
24-02-2019, 02:05 AM,
Post: #9
|
|||
|
|||
RE: Steps To Swap Used ECU into B8 Audi (immo 5)
Ok. So there is a password/file mod required to get into bootmode. With what tool can I extract this file? Galletto?
|
|||
24-02-2019, 21:58 PM,
Post: #10
|
|||
|
|||
RE: Steps To Swap Used ECU into B8 Audi (immo 5)
find somebody online can do with odis in 5 min. some member offer usb over internet service, if you have any j2534 device they can do. no need opening the ecu
|
|||
« Next Oldest | Next Newest »
|
Possibly Related Threads… | |||||
Thread | Author | Replies | Views | Last Post | |
Piaggio Porter Bosch M7.8.0 M78 Immo Off | Kayhan 17# | 0 | 9 |
1 hour ago Last Post: Kayhan 17# |
|
VL300 immo transfer | mecatech | 4 | 162 |
5 hours ago Last Post: mecatech |
|
IMMO off Renault Kangoo | johann74270 | 2 | 39 |
7 hours ago Last Post: johann74270 |
|
immo off bosch edc15vm+ audi a6 | tintoverano | 3 | 35 |
8 hours ago Last Post: sokisoki3 |
|
IAW4HV.AS IMMO OFF | BORUCU | 1 | 22 |
9 hours ago Last Post: Mrpromega |
|
No Feedback Given MITSUBISHI L200 E6T01476 IMMO OFF | crisvenua2 | 3 | 243 |
Yesterday, 14:49 PM Last Post: raffy haddad |
|
IMMO OFF PSA SID 807EVO | GTR35 | 4 | 108 |
Yesterday, 13:59 PM Last Post: k.elmajdouby |
|
Mitsubishi Pajero E6TO immo off | johann74270 | 2 | 50 |
Yesterday, 12:30 PM Last Post: johann74270 |
|
Solved ✔ VW Lupo 1.4FSI MED7.5.10 immo off | vwdamian | 2 | 33 |
Yesterday, 08:42 AM Last Post: vwdamian |
|
VW MED17.5 BAD IMMO OFF | victorysatgr | 6 | 64 |
Yesterday, 08:03 AM Last Post: ROD-BENDERS |
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content