[marexandy]

Hello, everyone,


I get the following error message with the new ISTA version 4.37.30 when trying to carry out a software update

"A fault occurred during calculation of the measures plan. The required programming is therefore not available.
Please contact Technical Support."

The last firmware from the ISTA package is on the ICOM, it is connected with a cable.

Does anyone have an idea what the error is?

What car are you trying to flash? There is known problem with this version for certain vehicles. See release notes of version 4.37.30. Perhaps this is your case.
 

F11 535D 2016/07

[davidoff86]

the release notes state this is a known bug.

wait for the next release (4.37.4)

[marexandy]

the release notes state this is a known bug.

wait for the next release (4.37.4)

Thank You

[marexandy]

Hello, everyone,


I get the following error message with the new ISTA version 4.37.30 when trying to carry out a software update

"A fault occurred during calculation of the measures plan. The required programming is therefore not available.
Please contact Technical Support."

The last firmware from the ISTA package is on the ICOM, it is connected with a cable.

Does anyone have an idea what the error is?

What car are you trying to flash? There is known problem with this version for certain vehicles. See release notes of version 4.37.30. Perhaps this is your case.
 

F11 535D 2016/07

Good evening everyone,


if you are interested, I managed to update the software.
I had no chance in the network, but with the ICOM direct connection it worked perfectly.

Regards

[Raimo5]

Hi,

First of all, thank you for all your work. I'd like to know what the differences are between latest version and older, licensed version v4.32.

If I update 4.32 with latest databases, BLP and SDP then do I have access to latest programming data and technical information?

Thanks.

[2013m5]

I asked the tech yesterday at lunch place. The ISTA 4.37.30 lost KL15 during programming, and they have BMW IRAP “I hope I spell corrected” to program it.

[Raimo5]

Hi,

First of all, thank you for all your work. I'd like to know what the differences are between latest version and older, licensed version v4.32.

If I update 4.32 with latest databases, BLP and SDP then do I have access to latest programming data and technical information?

Thanks.

Seems like v4.32 does not accept programming data at all and sqlitedbs can't be updated either.

[YorikB]

Hi all
What is the latest ISTA running on Win 7?

[Spirit5676]

Anyone had ISTA 4.37.30 complaining about blocked port 12300 when updating a car? The windows firewall & defender off and no other antivir/firewall on computer. It was LCI F11 I still went ahead with the update and it updated everything fine except NBT. It started to flash NBT, but it was so slow that it had to be flashing NBT with UDS. Updated NBT with E-sys using HTTP so it didn't take forever.

[bennymx]

Do we know how long until 4.37.4x will be available via standalone?

Not asking because impatient, just wanted to know because I'm using 4.37.2x and was not going to bother with 3.