Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

ISTA Standalone / Standard Tools / PSdZData_Lite - last [MEGA]
29-05-2019, 19:00 PM,
Post: #151
RE: ISTA Standalone / SQLiteDBs / BLP / PSdZData_Lite - latest [MEGA]
(29-05-2019, 18:23 PM)Sedoy Wrote:  
(29-05-2019, 18:07 PM)Twointje Wrote:  Hello Sedoy if i use the motocycle fic for ISTA v4.17.23.18173  and after that i want to use Ista for my car will Ista also work for my car with the motorcycle fix ? Or do i have to change the guide exe again ?

Great work thanks.

It works both, Car and Motorcycle.

Thank you Sedoy.

Keep up the great work.

Twointje



(29-05-2019, 15:43 PM)Dubnik Wrote:  Hi,

I've a very strange problem. ISTA won't connect to a vehicle through a router and ICOM, the setup should be fine. I've used this hardware setup before. ISTA is set so DHCP and ISPI Next and computer is also set to DHCP.  In the connection manager the ICOM is shown correctly, but it doesn't connect, always shows "The vehicle could not be identified". If I connect the ICOM directly to the computer, everything works just fine. Has anyone an idea what could be wrong?

Regards

I do not have a ICOM, so I can not help you with that.

If I help you, please push thanks and reputation.  under
Quote this message in a reply
29-05-2019, 21:49 PM,
Post: #152
RE: ISTA Standalone / SQLiteDBs / BLP / PSdZData_Lite - latest [MEGA]
Installed an everything seemed to be working perfectly until I scanned an F01 and it popped a fault during scanning.

The Programming system could not be initialized. The ISTA installation may be damaged or incorrectly configured. Reinstall ISTA if problems persist contact local support.

I have ISTA D 4.17.13 and BLP and SDP 4.17.11 installed. What am I doing wrong?

D
Quote this message in a reply
30-05-2019, 07:00 AM,
Post: #153
RE: ISTA Standalone / SQLiteDBs / BLP / PSdZData_Lite - latest [MEGA]
(29-05-2019, 21:49 PM)dfitz21 Wrote:  Installed an everything seemed to be working perfectly until I scanned an F01 and it popped a fault during scanning.

The Programming system could not be initialized. The ISTA installation may be damaged or incorrectly configured. Reinstall ISTA if problems persist contact local support.

I have ISTA D 4.17.13 and BLP and SDP 4.17.11 installed. What am I doing wrong?

D

How did you install it? Even unpacked, or with my installer? Are the files in the right folder? Did you use the regfiles?

iLean offline license (PM)
FeatureCodes CarPlay (PM)
FSC-Generator
Reputation: +1 - dfitz21 [+1]
Quote this message in a reply
30-05-2019, 07:06 AM,
Post: #154
RE: ISTA Standalone / SQLiteDBs / BLP / PSdZData_Lite - latest [MEGA]
Is there also a torrent file for the latest Ista-D and SQLite DBs?

If I help you, please push thanks and reputation.  under
Quote this message in a reply
30-05-2019, 07:11 AM,
Post: #155
RE: ISTA Standalone / SQLiteDBs / BLP / PSdZData_Lite - latest [MEGA]
(30-05-2019, 07:06 AM)Twointje Wrote:  Is there also a torrent file for the latest Ista-D and SQLite DBs?

You mean 4.17.23? Not from me.

iLean offline license (PM)
FeatureCodes CarPlay (PM)
FSC-Generator
Quote this message in a reply
30-05-2019, 12:18 PM,
Post: #156
RE: ISTA Standalone / SQLiteDBs / BLP / PSdZData_Lite - latest [MEGA]
I didnt see your installer. I just unpacked and put the files into the folders that I always do. Maybe I made a mistake this time. Where is your installer?

D
Quote this message in a reply
30-05-2019, 12:29 PM,
Post: #157
RE: ISTA Standalone / SQLiteDBs / BLP / PSdZData_Lite - latest [MEGA]
(30-05-2019, 12:18 PM)dfitz21 Wrote:  I didnt see your installer. I just unpacked and put the files into the folders that I always do. Maybe I made a mistake this time. Where is your installer?

D

Installer for 4.17.13 already deleted. Actual Version with Installer is 4.17.23. Next Week follow 4.17.31.  rofl

After unpack you execute right regfiles?

iLean offline license (PM)
FeatureCodes CarPlay (PM)
FSC-Generator
Quote this message in a reply
30-05-2019, 12:54 PM,
Post: #158
RE: ISTA Standalone / SQLiteDBs / BLP / PSdZData_Lite - latest [MEGA]
Are you going to make Standalone 4.17.31.18224
Quote this message in a reply
30-05-2019, 13:02 PM,
Post: #159
RE: ISTA Standalone / SQLiteDBs / BLP / PSdZData_Lite - latest [MEGA]
Its done. But i release it after official release from BMW. Next Week.

iLean offline license (PM)
FeatureCodes CarPlay (PM)
FSC-Generator
Reputation: +2 - Bimmer540 [+1] , M-Simon [+1]
Quote this message in a reply
[+] 6 users say Thank You to Sedoy for this post
30-05-2019, 17:14 PM,
Post: #160
RE: ISTA Standalone / SQLiteDBs / BLP / PSdZData_Lite - latest [MEGA]
I have a problem with 4.17.23.  ICOM with E models does not recognize KL 15 and KL 30, is known about what?  Must always confirm the read out of the fault memory with Cancel.
Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
XZBMW ISTA 4.28.22 activated Link or torrent m-power 0 15 1 hour ago
Last Post: m-power
XZBMW ISTA Czech Database ( 4.42.XX - 4.47.XX) inspi1981 66 8,070 2 hours ago
Last Post: inspi1981
XZBMW DIY: Reset FXX FEM Mileage with affordable tools armenh7 0 121 Yesterday, 23:35 PM
Last Post: armenh7
XZBMW ISTA 4.46.xx problems and possible solution Sedoy 101 12,974 Yesterday, 08:20 AM
Last Post: NeRkO20
XZBMW ISTA Standalone Licenserequest up to v4.37.4x Sedoy 8,722 678,822 08-05-2024, 21:18 PM
Last Post: Sedoy
XZBMW Update ISTA at once 4.43.40 (ISTA Update Program) charlesjyw 39 8,065 08-05-2024, 21:13 PM
Last Post: shaggyshadow
XZBMW ISTA+ 4.47.2x Install Files - MEGA shawnsheridan 8 1,187 07-05-2024, 18:38 PM
Last Post: mar.wo
  ista 4.46 Standalone kiranabc 106 13,569 07-05-2024, 10:49 AM
Last Post: palapas1974
XZBMW Ista-D last working version please help Warsteiner 4 296 06-05-2024, 19:40 PM
Last Post: 2013m5
  [MEGA] ESYS + PSDZ Full & Lite + ICOM Firmware + MANUALS + TOOLS hashtagmaster 109 36,996 06-05-2024, 17:22 PM
Last Post: hashtagmaster

Forum Jump:


Users browsing this thread:
Abou Jambo, 3 Guest(s)

Return to TopReturn to Content