Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Problem programming BMW CAS3+ Encrypted key with VVDI2
31-01-2019, 17:12 PM,
Post: #1
|
|||
|
|||
Problem programming BMW CAS3+ Encrypted key with VVDI2
Hi,
I'm using VVDI2 and VVDI prog to make all kind of BMW keys. So far it's a great tool, been using it now for 3 months and really not had any problems with it. But when i program a key for a CAS3++ (CAS3+ encrypted version) i get a fault in the CAS module every time. Other CAS modules like CAS3 and CAS3+ ISTAP version work fine without faults. It gives an error on the CID and a A0AA CAS: Control Unit fault in ISTA. The programmed key starts the car just fine but every time you start it with the new key it gives a fault. It's in Dutch on the picture but it says something like "Engine starting malfunction! Close and reopen the drivers door. Remove key fob and insert it again in the slot." The error on the CID goes away if you delete the fault memory with ISTA however the A0AA fault still remains in fault memory. The car operates just fine with this fault stored. Anyone has some experience with this? or should i just contact Xhorse for help? Thanks! |
|||
31-01-2019, 17:24 PM,
(This post was last modified: 31-01-2019, 17:25 PM by raffy haddad.)
Post: #2
|
|||
|
|||
RE: Problem programming BMW CAS3+ Encrypted key with VVDI2
Hello did you make downgrade flash?
Always new stuff to learn
Skype: raffy.haddad File services : multi brand ecu immo off , VW solutions : immo transfer immo off , pcr 2.1 immo , BMW EDC16 IMMO OFF , .... Yamaha smart key supply pin code from dump ( TMAX , XMAX ) Chevrolet simens sirus D3x D4x D5x delphi MR 140 IMMOOFF I DO MY BEST HERE TO HELP YOU MAKE SOME $$$ BUT ON PRIVATE IS DIFFERENT Members who not report back they're name will be black listed on my list |
|||
31-01-2019, 17:46 PM,
Post: #3
|
|||
|
|||
RE: Problem programming BMW CAS3+ Encrypted key with VVDI2
|
|||
31-01-2019, 17:55 PM,
Post: #4
|
|||
|
|||
RE: Problem programming BMW CAS3+ Encrypted key with VVDI2
You can restore flash back to original and problem solved
|
|||
31-01-2019, 18:50 PM,
Post: #5
|
|||
|
|||
RE: Problem programming BMW CAS3+ Encrypted key with VVDI2
(31-01-2019, 17:55 PM)Impac Wrote: You can restore flash back to original and problem solved Thanks for your answer. So VVDI2 damages the flash during the procedure? That's really shitty.. So if i understand right i have to backup the flash before programming a key and restore the flash after programming? Only the flash needs to be restored right so the new key will still work i imagine as long as i don't restore the original eeprom, correct? |
|||
31-01-2019, 20:05 PM,
(This post was last modified: 31-01-2019, 20:07 PM by rs@chip.)
Post: #6
|
|||
|
|||
RE: Problem programming BMW CAS3+ Encrypted key with VVDI2
(31-01-2019, 18:50 PM)Batje Wrote:(31-01-2019, 17:55 PM)Impac Wrote: You can restore flash back to original and problem solved all thouse programers like vvdi,cgdi,etc program the cas with bunch of creap to be able make the key..thats why you uswaly end with funy errors like yours,int.error..etc you can restore cas to backup state or reflash it with Kfp is the fastest way |
|||
31-01-2019, 20:34 PM,
Post: #7
|
|||
|
|||
RE: Problem programming BMW CAS3+ Encrypted key with VVDI2
Just flash it with Winkfp and problem solved
|
|||
31-01-2019, 21:27 PM,
Post: #8
|
|||
|
|||
RE: Problem programming BMW CAS3+ Encrypted key with VVDI2
(31-01-2019, 20:05 PM)rs@chip Wrote: all thouse programers like vvdi,cgdi,etc program the cas with bunch of creap to be able make the key..thats why you uswaly end with funy errors like yours,int.error..etc you can restore cas to backup state or reflash it with Kfp is the fastest way Thanks guys! I will flash the CAS with winKFP next time. I've used winkfp before but have not yet flashed a CAS.. Just to be clear: update zusb in winkfp and right before pressing the program button remove key from slot, right? I'm using an official ICOM Next and ediabas is already properly set up for it. Will it work OK because i've read some horror posts about CAS update failing with ICOM? |
|||
08-02-2019, 16:06 PM,
Post: #9
|
|||
|
|||
RE: Problem programming BMW CAS3+ Encrypted key with VVDI2
(31-01-2019, 21:27 PM)Batje Wrote:(31-01-2019, 20:05 PM)rs@chip Wrote: all thouse programers like vvdi,cgdi,etc program the cas with bunch of creap to be able make the key..thats why you uswaly end with funy errors like yours,int.error..etc you can restore cas to backup state or reflash it with Kfp is the fastest way I cant tel for icom next as I dont oun one..but standard icom or iven good k-dcan will work and everithing will be fine,yust keep in mind stable charger is important |
|||
08-02-2019, 18:27 PM,
Post: #10
|
|||
|
|||
RE: Problem programming BMW CAS3+ Encrypted key with VVDI2
i think cas in montage mode
BR EDDY |
|||
« Next Oldest | Next Newest »
|
Possibly Related Threads… | |||||
Thread | Author | Replies | Views | Last Post | |
Volvo XC90 CEM problem | pimpammm | 0 | 25 |
Yesterday, 18:52 PM Last Post: pimpammm |
|
cas3 - msd80 isn | bboctavian | 6 | 241 |
27-03-2024, 07:06 AM Last Post: DSESET86 |
|
Mercedes C180 immo problem | al70 | 0 | 38 |
24-03-2024, 19:26 PM Last Post: al70 |
|
Solved ✔ Problem Mini Cas3+ akl | samirfe | 4 | 140 |
21-03-2024, 15:01 PM Last Post: samirfe |
|
Solved ✔ Cas2 up cas3+ problem | johann74270 | 1 | 73 |
19-03-2024, 23:51 PM Last Post: johann74270 |
|
BMW CAS2 to CAS3 Immo Data Transfer | Puntt | 1 | 171 |
19-03-2024, 20:48 PM Last Post: johann74270 |
|
Flash file for cas3+ bmw 523i e60 2008 | Akd@1975 | 1 | 86 |
17-03-2024, 11:47 AM Last Post: Gabriel87 |
|
CAS2 to CAS3+ | johann74270 | 5 | 237 |
14-03-2024, 22:05 PM Last Post: johann74270 |
|
cas3 9389115 downgrade fail - vvdi keytoolplus | motorsoft | 2 | 117 |
14-03-2024, 10:08 AM Last Post: sixcode |
|
Beetly 5C 2012 immo/dash problem | Arczi26 | 2 | 88 |
13-03-2024, 14:51 PM Last Post: Arczi26 |
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content