Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Audi 03L906022B
31-01-2019, 17:48 PM,
Post: #1
|
|||
|
|||
Audi 03L906022B
Hi,
I have an audi A4 2.0 tdi wich was programed before I bought it, but i would like to remove power increase and keep only DFP and EGR off, can anyone help me? first doubt wich firmware should i use, since 3173 is not available Second doubt is it possible to remove the DFP and EGR in a frf or Sgo file ? Anyone can share the correct file for my car with DFP and EGR off? Part No SW: 03L 906 022 JM HW: 03L 906 022 B Component: R4 2,0L EDC H01 3173 Revision: --H01--- Coding: 0104002C18072118 Thank you |
|||
31-01-2019, 20:25 PM,
Post: #2
|
|||
|
|||
RE: Audi 03L906022B
(31-01-2019, 17:48 PM)Ferraz Wrote: Hi, Yes , that is possible EGR DPF off on your frf file. |
|||
31-01-2019, 21:04 PM,
Post: #3
|
|||
|
|||
RE: Audi 03L906022B
(31-01-2019, 20:25 PM)ototest Wrote:(31-01-2019, 17:48 PM)Ferraz Wrote: Hi, He have no FRF file for his SW Number |
|||
31-01-2019, 22:31 PM,
Post: #4
|
|||
|
|||
RE: Audi 03L906022B
Yes, I dont have the frf file because this sw was not release in Erwin, but there are other SW that might be used with my ECU but I am not sure wich one should I use...
|
|||
01-02-2019, 14:35 PM,
Post: #5
|
|||
|
|||
RE: Audi 03L906022B
(31-01-2019, 22:31 PM)Ferraz Wrote: Yes, I dont have the frf file because this sw was not release in Erwin, but there are other SW that might be used with my ECU but I am not sure wich one should I use... i have 3173 version ori file. someone should egr/dpf off it because im not good. |