[RamiroFR]

Hi friends, i'm from Argentina.
Congratulations for this forum. It's excellent.

I'm trying to swap my 1P Seat Leon II Cluster. With VAG K+Commander, I can read the original Pin code cluster from my car correctly, but when i swap to the full FIS new cluster, i can't obtain this code. The program shows "Security access code not found!. Reset instrument cluster and try again".

I read the memory of inmo data anyway, but i don't know how read the pin on this file.

Can someone helpme?

I will appreciate your help 
Thank you very much for all.
Best regards,
Ramiro. 

[raffy haddad]

hello
please specify car model dash brand and device that you read
regards

[lupu_sandu]

2007.08 clusters cannot be adapted with pin only.
You need CS+pin and power class, also proper tools via obd2.

[RamiroFR]

Oh thank you very much!
I thought that procedure was for Seat Leon 2 facelift (MY09-11).

My original board is 1P0-920-825B (Date: May 2007) and the new one is 1P0-920-841B (Date: August, 2007)

I thought I could do the process by getting the PIN CODE of both, and then from the VCDS with the Security access to program both keys.

Best regards!
Ramiro.

---

Both are VDO Siemens.

Both are Seat Leon FR original instrument.

Thank you very much.
best regards.
Ramiro.

[RamiroFR]

2007.08 clusters cannot be adapted with pin only.
You need CS+pin and power class, also proper tools via obd2.

Thanks!
Last question:
If i buy a cluster that date is 2007.05 (May) or lower (2006 etc.. early) like my actually installed cluster, it works with VAG CAN + VCDS method?

Thank you again!
Best regards,
Ramiro.