Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
DUMP FILE ANALYSIS
08-02-2019, 14:38 PM,
Post: #1
|
|||
|
|||
DUMP FILE ANALYSIS
I recently read an eeprom from Toyota Isis Immobilizer 93c66.
It first gave me a wrong reading. I used UPA serial programmer to read file and the car key could not be programmed with that file. I then tried Using X100 eeprom program. The same eeprom gave me a different dump of which was used to program the key. The engine was started, and my client is happy. Is there is any way you advanced guys on this forum analyse a dump that you may know that this file has been read wrongly or right? any software to analyse the reading of dump? Thanks in advance |
|||
08-02-2019, 16:15 PM,
(This post was last modified: 08-02-2019, 16:25 PM by raffy haddad.)
Post: #2
|
|||
|
|||
RE: DUMP FILE ANALYSIS
Hello
When you read with upa did you choose c66 or c66 16 bit Alwaya read dump as 8 bit and 16 bit and save them byexperience you will learn Some key data accepted as 8 bit and as 16 bit Hope you understand me And for analyse best tools and quick is propper keymaker Regards Always new stuff to learn
Skype: raffy.haddad File services : multi brand ecu immo off , VW solutions : immo transfer immo off , pcr 2.1 immo , BMW EDC16 IMMO OFF , .... Yamaha smart key supply pin code from dump ( TMAX , XMAX ) Chevrolet simens sirus D3x D4x D5x delphi MR 140 IMMOOFF I DO MY BEST HERE TO HELP YOU MAKE SOME $$$ BUT ON PRIVATE IS DIFFERENT Members who not report back they're name will be black listed on my list |
|||
Reputation: +1 - dabaca [+1] | |||
08-02-2019, 16:56 PM,
Post: #3
|
|||
|
|||
RE: DUMP FILE ANALYSIS
well,
Thanks for that pal |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content