[Boeufy]

Hi,

My car is a 2008 (E92) BMW (330i).

I recently reversed my car into wall and only incurred slight damage. Ever since then every time I start my car I get "restraint system faulty.....". When I took car to garage they read two error codes (93AE and 93AF). This seems to relate to both of my front headrest airbags going off.

I believe I can program my car to "forget" about the front headrests. I want to keep them in this state as they are more supportive and it will cost a load of money to get them replaced.

I have successfully loaded NCS Expert onto my laptop and can communicate with the car, download FSW_PSW file, etc.

Which ECU should I be looking at programming to make the headrests "not active"? I have grabbed the "ABG" ECU settings but cannot see any reference to the headrest airbags.

[Silva1337]

you need to disconect active head restraints and code off it , if you need help with coding send me trc privately to PM

[Boeufy]

you need to disconect active head restraints and code off it , if you need help with coding send me trc privately to PM

Thank you, I know how to code just need to know what options need removing, if you could PM me with what stuff that needs to be deleted will be much appreciated, do you know what ECU I would be pulling the trc from?

Someone suggested it was in the ABG module
AKS_LINKS_1_CD
aktiv (Make this nicht_aktiv, this is the left side active head restraint.)
AKS_RECHTS_1_CD
aktiv (Make this nicht_aktiv, this is the right side active head restraint.)

[Silva1337]

ecu ACSM , ABG in NCS EXPERT
search something like AKS LINK ETC