Please make sure you read Rules! and DO NOT upload/post any illegal softwares or Pirated Material , Thank you for understanding :)
  1. AutoHex II

  2. CarLabImmo

  3. TMPro 2



Corsa D IPC issue
11-02-2019, 13:01 PM,
Post: #1
Corsa D IPC issue
Hi

Can anybody help with my challenge?

I am using the GM MDI with Tec2win and globalTIS

i have a Corsa D with a BCM which malfunctioned due to a flat battery

I am trying to reset the following modules

IPC
BCM
Airbag
Key programming

my issue is this

I have managed to reset the IPC & BCM

I have programmed the BCM however i cannot program the IPC

each time i try to programme it i get an error message saying that there is a piece of software whic can not be recognised and that the module programming has been unsuccessful as a result of it

bit stuck now as i have untied the module from the vehicle but cannot get it to reprogram. Am i doing something wrong?
Quote this message in a reply
11-02-2019, 14:19 PM,
Post: #2
RE: Corsa D IPC issue
I think, you need to first tell us how you mean you have programmed the BCM.

My course of action would be, reset all the modules as you say you have, then program a new key, or the same key. I don't know about Tech2, but I always use the Old Opcom for the Corsa IPC. It is a very stubborn component, that cars IPC. It requires that old Opcom with ht earliest software.

Hope I have helped

I live a life of favour drive

If I helped, Press the #Thanks and #Reputation buttons under
Quote this message in a reply
11-02-2019, 15:56 PM, (This post was last modified: 11-02-2019, 15:58 PM by dannysconnect.)
Post: #3
RE: Corsa D IPC issue
(11-02-2019, 14:19 PM)snyper Wrote:  I think, you need to first tell us how you mean you have programmed the BCM.

My course of action would be, reset all the modules as you say you have, then program a new key, or the same key.  I don't know about Tech2, but I always use the Old Opcom for the Corsa IPC. It is a very stubborn component, that cars IPC. It requires that old Opcom with ht earliest software.

Hope I have helped

Thanks for this

so i untied the BCM using TECH2WIN & reprogrammed it using GLOBALTIS

the message that appears says that the IPC software is newer than its original software resulting in me not being able to complete the programming of the IPC

i have not programmed the keys yet as i couldn't programme the IPC - i thought i had to programme the IPC first and then do the keys after

but it makes sense if you say the car prefers an older version of OPCOM to work. are you referring to the corsa D?
Quote this message in a reply
11-02-2019, 19:42 PM,
Post: #4
RE: Corsa D IPC issue
(11-02-2019, 15:56 PM)dannysconnect Wrote:  
(11-02-2019, 14:19 PM)snyper Wrote:  I think, you need to first tell us how you mean you have programmed the BCM.

My course of action would be, reset all the modules as you say you have, then program a new key, or the same key.  I don't know about Tech2, but I always use the Old Opcom for the Corsa IPC. It is a very stubborn component, that cars IPC. It requires that old Opcom with ht earliest software.

Hope I have helped

Thanks for this

so i untied the BCM using TECH2WIN & reprogrammed it using GLOBALTIS

the message that appears says that the IPC software is newer than its original software resulting in me not being able to complete the programming of the IPC

i have not programmed the keys yet as i couldn't program the IPC - i thought i had to programme the IPC first and then do the keys after

but it makes sense if you say the car prefers an older version of OPCOM to work. are you referring to the corsa D?

Sorry, my bad. I was referring to the Corsa C. Gave me the same problems, all i did was after divorcing them Instrument cluster, I remarried it, it failed. I just went ahead to program the key, it all synced well. But i had to use the older version of OPCOM.
What I cannot understand is if you never changed the IPC, why would the software version be different?

I live a life of favour drive

If I helped, Press the #Thanks and #Reputation buttons under
Quote this message in a reply
12-02-2019, 13:07 PM,
Post: #5
RE: Corsa D IPC issue
(11-02-2019, 19:42 PM)snyper Wrote:  
(11-02-2019, 15:56 PM)dannysconnect Wrote:  
(11-02-2019, 14:19 PM)snyper Wrote:  I think, you need to first tell us how you mean you have programmed the BCM.

My course of action would be, reset all the modules as you say you have, then program a new key, or the same key.  I don't know about Tech2, but I always use the Old Opcom for the Corsa IPC. It is a very stubborn component, that cars IPC. It requires that old Opcom with ht earliest software.

Hope I have helped

Thanks for this

so i untied the BCM using TECH2WIN & reprogrammed it using GLOBALTIS

the message that appears says that the IPC software is newer than its original software resulting in me not being able to complete the programming of the IPC

i have not programmed the keys yet as i couldn't program the IPC - i thought i had to programme the IPC first and then do the keys after

but it makes sense if you say the car prefers an older version of OPCOM to work. are you referring to the corsa D?

Sorry, my bad. I was referring to the Corsa C. Gave me the same problems, all i did was after divorcing them Instrument cluster, I remarried it, it failed. I just went ahead to program the key, it all synced well. But i had to use the older version of OPCOM.
What I cannot understand is if you never changed the IPC, why would the software version be different?

Exactly my question - the guy has had it from new and has said he has never taken it to a dealer for software updating nor has the cluster been swapped. i have been informed that I can do it but there is an extra security pass through required? which is different to the security code provided
Quote this message in a reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  Solved ✔ Mercedes w203 esl issue Shinehead 10 296 03-04-2019, 18:31 PM
Last Post: Shinehead
XZBMW DDE7 811 111 EWS4 SYNC ISSUE - DESPERATE TO RESOLVE ravz 6 204 01-04-2019, 08:31 AM
Last Post: ROD-BENDERS
KOpel Opel corsa 1.3 mjd6jo immo off autodiag32 5 633 26-03-2019, 08:10 AM
Last Post: victorysatgr
  PIN CODE OPEL CORSA C zaidanediag 1 136 23-03-2019, 16:26 PM
Last Post: raffy haddad
HPorshe Porsche 986 boxter start issue salaausi 8 166 15-03-2019, 03:51 AM
Last Post: salaausi
XZBMW DDE7 811 111 EWS4 SYNC ISSUE ravz 14 477 14-03-2019, 13:24 PM
Last Post: ravz
KOpel Solved ✔ help corsa 1.3 bosch ecu immo off jacques23 4 206 21-02-2019, 20:20 PM
Last Post: jacques23
KOpel Corsa D Immo Off TilQ34 1 195 10-02-2019, 21:57 PM
Last Post: mrdan
KOpel Solved ✔ Corsa D BCM PIN magdex 5 440 12-01-2019, 21:53 PM
Last Post: ibrahim951
  TECHSTREAM IMMOBILISATION ISSUE legze 0 182 20-12-2018, 12:19 PM
Last Post: legze

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content