Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

FRM 2 PROBLEMS
13-02-2019, 08:21 AM,
Post: #1
XZBMW  FRM 2 PROBLEMS
Hi.

I have loads of lights warnings on the frm2. 
Can someone see eeprom and flash there can be the issue?

Thanks


Attached Files
FRM2_EEPROM_FLASH.rar
File Type: .rar
Downloaded: 11 times
Size: 70.92 KB

Quote this message in a reply
18-02-2019, 20:04 PM, (This post was last modified: 18-02-2019, 22:01 PM by Batje.)
Post: #2
RE: FRM 2 PROBLEMS
(13-02-2019, 08:21 AM)braticks Wrote:  Hi.

I have loads of lights warnings on the frm2. 
Can someone see eeprom and flash there can be the issue?

Thanks

Is the module still accessible for diagnostics?
If so just flash it with WinKFP, that should take care of the P-flash.
Recode it to VO defaults with NCS expert, then it should be all good to go.

If it does not respond to diagnostic requests via ISTA or INPA then you should search for P-Flash and EEPROM dumps that match your FRM as closely as possible and program them to the FRM. then Flash it with winKFP and code it to your car.

If my post was helpful to you please give me a thanks and/or reputation biggrin
Quote this message in a reply
[+] 1 user says Thank You to Batje for this post
03-04-2019, 07:18 AM,
Post: #3
RE: FRM 2 PROBLEMS
(18-02-2019, 20:04 PM)Batje Wrote:  
(13-02-2019, 08:21 AM)braticks Wrote:  Hi.

I have loads of lights warnings on the frm2. 
Can someone see eeprom and flash there can be the issue?

Thanks

Is the module still accessible for diagnostics?
If so just flash it with WinKFP, that should take care of the P-flash.
Recode it to VO defaults with NCS expert, then it should be all good to go.

If it does not respond to diagnostic requests via ISTA or INPA then you should search for P-Flash and EEPROM dumps that match your FRM as closely as possible and program them to the FRM. then Flash it with winKFP and code it to your car.

I have ir on bench. 
Is not the esyest way to just find flash and eeprom dumps to flash. 
Im not good in winKFP, I using hextag for flashings
Quote this message in a reply
03-04-2019, 11:09 AM,
Post: #4
RE: FRM 2 PROBLEMS
(03-04-2019, 07:18 AM)braticks Wrote:  
(18-02-2019, 20:04 PM)Batje Wrote:  
(13-02-2019, 08:21 AM)braticks Wrote:  Hi.

I have loads of lights warnings on the frm2. 
Can someone see eeprom and flash there can be the issue?

Thanks

Is the module still accessible for diagnostics?
If so just flash it with WinKFP, that should take care of the P-flash.
Recode it to VO defaults with NCS expert, then it should be all good to go.

If it does not respond to diagnostic requests via ISTA or INPA then you should search for P-Flash and EEPROM dumps that match your FRM as closely as possible and program them to the FRM. then Flash it with winKFP and code it to your car.

I have ir on bench. 
Is not the esyest way to just find flash and eeprom dumps to flash. 
Im not good in winKFP, I using hextag for flashings


Here you have winKFP expert mode instruction step by step. Worth it to try it with WinKFP first, than searching for proper dumps.


Attached Files
winKFP expert mode.txt
File Type: .txt
Downloaded: 20 times
Size: 70 bytes


Only BMW services:

Remote coding/programming - E, F, G serie
HDD change, Carplay, Screen mirroring activation
FSC pack - CIC, NBT, NBT EVO, ENTRYNAV2, MGU, KAFAS
Remote reset 8HP ISN F serie
ELV disable for CAS3, 3+
Quote this message in a reply
03-04-2019, 11:41 AM,
Post: #5
RE: FRM 2 PROBLEMS
(03-04-2019, 11:09 AM)Matthew53 Wrote:  Here you have winKFP expert mode instruction step by step. Worth it to try it with WinKFP first, than searching for proper dumps.

This same again. I don't understand.
If FRM is seen by diagnostic, in my understanding it can be flashed allways with normal way. Either with ISTA/P or WinKFP.
If it does not respond, go for Xprog.

If FRM functions allway ok, but only problem with lights, I assume that there are only short circuit counters exceed.
Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
XZBMW ISTA 4.46.xx problems and possible solution Sedoy 76 7,390 27-03-2024, 20:02 PM
Last Post: Node
XZBMW CIC-MID fsc problems ayllon308 0 94 08-02-2024, 21:25 PM
Last Post: ayllon308
XZBMW ENET Connection Problems mikkaav 4 428 11-12-2023, 20:27 PM
Last Post: Node
  BMW E87 2004 CAS2 ELV problems ravager 2 165 06-12-2023, 16:23 PM
Last Post: ravager
  Problems in the E-sys 23.04.00 BMWF750GS 4 681 26-08-2023, 01:43 AM
Last Post: BMWF750GS
  F31 06/17 Front PDC retrofit problems Freddy1 3 304 19-08-2023, 13:00 PM
Last Post: Node
  Problems ID4 hdd to sdd marcospoffo 3 408 17-05-2023, 14:58 PM
Last Post: juantg93
  E71 X6 IHKA problems dmxpowa 7 549 26-04-2023, 20:29 PM
Last Post: Beard
  Problems installing ista 4.39.20 with sdp 4.40.50 guyf4 4 1,100 26-04-2023, 12:08 PM
Last Post: Beard
XZBMW BMW f30 swap engine from (N26) to (B58M) but having power problems rana 7 760 26-04-2023, 02:42 AM
Last Post: LeonidLunin

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content