[fcarocha]

I need to read an MJD6JFHWB. I have ktag and set of adapters. I'm having a hard time knowing what the ktag pins are for confirming on the ECU.

[victorysatgr]

give attention in ktag instruction for resistance and pin 1 bdm frame ....

and check the adapter pins fits well in bdm... use it exactly as you see it at photos...

[fcarocha]

I can not read with the adapters. you can point me to the ktag pins. soldered the wires

sample pin 3 - gnd etc...

[victorysatgr]

have you remove the 0 resistance?


i have read-write many times marrelli 6xx ecus with this adapter..... weird....  you start from second pin right?







and this is the bdm pin out  (adapter is from galleto)

   

[fcarocha]

I saw now that I have a broken pin (I do not know if it was already broken in the attempts). I tried to read with fgtech with the link below without success.

Can you tell me the ktag pinout?

---

i check other pinout...

[fcarocha]

image ktag i remove youtube...

[victorysatgr]

if you use the pin out from galleto and (galleto work very well at that ecus) you can't manage to read the ecu, you do something wrong, check again...