Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Op Com help
18-03-2019, 17:56 PM,
Post: #1
|
|||
|
|||
Op Com help
Hi, brought a op com device off ebay, came with disc software, VAUX-COM_120309a+131223d ,loaded on to pc windows 7 64bit, connected to car (08 zafira) not communicating with ECU.
picture is the one i have if it helps.thanks |
|||
18-03-2019, 19:58 PM,
Post: #2
|
|||
|
|||
RE: Op Com help
There is a thread for this kind of problems so it wasn't need to open a new one.
But anyway. Try it using Op-COm China Clone 2010 software. Do not try to reflash it no matter what because this tool has a "fake" MCU and you will brick it for good. Good luck |
|||
18-03-2019, 20:36 PM,
Post: #3
|
|||
|
|||
RE: Op Com help
(18-03-2019, 19:58 PM)mattydr67 Wrote: There is a thread for this kind of problems so it wasn't need to open a new one. were would i get the download for Op-COm China Clone 2010 software ,would i need 1.45 1.59...? thanks |
|||
19-03-2019, 12:06 PM,
(This post was last modified: 19-03-2019, 12:08 PM by mattydr67.)
Post: #4
|
|||
|
|||
RE: Op Com help
Usually op-com china clone is using fw1.39 but you can use it with any firmware version.
As I said do not try to reflash that MCU because you will brick it if you didn't it yet. If you are using "Search" button you can find it. From Here you can download it Good luck |
|||
19-03-2019, 20:43 PM,
(This post was last modified: 19-03-2019, 20:47 PM by Mario68.)
Post: #5
|
|||
|
|||
RE: Op Com help
(18-03-2019, 20:36 PM)scoop64 Wrote:(18-03-2019, 19:58 PM)mattydr67 Wrote: There is a thread for this kind of problems so it wasn't need to open a new one. Here you have. (slow download) |