Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Solved ✔ Flashing G series EVO HW4.1
20-02-2019, 08:37 AM,
(This post was last modified: 25-03-2019, 02:44 AM by Clusters.)
Post: #1
|
|||
|
|||
Flashing G series EVO HW4.1
I have a G30 EVO on the bench, HW 4.1 with extra APIX2 & GPS plugs, can I flash this like any other EVO unit and code to F-series spec?
The issue I am having is I cannot connect a phone via bluetooth, I have antennas correctly connected but when I try to pair a phone it says "Unable to establish connection - Retry/Ok" - is this a coding parameter that needs changing because it's looking for hardware not present on the bench? TIA |
|||
20-02-2019, 14:03 PM,
Post: #2
|
|||
|
|||
RE: Flashing G series EVO HW4.1
UPDATE: I flashed the unit to an F series FA after clearing V850 and deleting FSC.
I have component protection active, I have an FSC set - what do I need to do to rectify this? Any help is appreciated. |
|||
21-02-2019, 06:50 AM,
(This post was last modified: 21-02-2019, 06:52 AM by Wibbles.)
Post: #3
|
|||
|
|||
RE: Flashing G series EVO HW4.1
Problem solved:
I imported the 170 FSC with esys then used the FSCCheck job to re-activate all the rejected codes. Massive thanks to PShoey for his amazing support as usual. The bluetooth works now, this was because I didn't have a Kombi connected on the bench. |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content