[flavio69]

Any ideas about clip185,with RLT interface??

[yavheni]

Board 16/ Board 17 - ON

[omarzoro]

Hello everyone


For those who have a connection problem with interface RLT2002 (ori or clone):

You must modify 2 files in version 185 (Computer >>> Disk C >>> Clip >>> Config):

- probesConfiguration

and - probesConfiguration_logs (normally both at the bottom)

If you are in V184, recover these 2 files, install the V185 and modify the files

DO NOT REPLACE THE "VIMI" FILE .......

Small Reminder: If a Clip Version is already installed on your PC DO NOT REPEAT activation procedure

Files in pj (no pass, just a thanks)

Good diags

[m1t1k1]

Hi, does anyone know what is the difference between the two boards green and gold? which one is best for purchase? https://www.aliexpress.com/item/Full-Chi...6d7a683173

[mattydr67]

If you wanna buy a real RLT2002 CAN CLIP probe so buy the gold one
If you wanna buy an Alliance VI in a RLT probe case buy the green one but I will call it "low quality" because I don't wanna call it "SH...T".
If you wanna a Alliance VI try to buy a grey Nissan Consult 3 HQ clone not the red one. w/ or w/o bluetooth. I have it with bluetooth and even its a HQ clone I reworked and I am using it by bluetooth.
Your choice next
Good luck

[m1t1k1]

You mean this is a better option?

[mattydr67]

Yes something like that. But that one need rework because it isn't a HQ clone.
Ok I bought a HQ clone for 400$ and even that one need it rework.
But this because I am nuts sometime because its working as it is very good.
Good luck

[m1t1k1]

And what kind of processing does it need and is it achievable for an average consumer?

[alchabab]

Hi there amigos, i have installed V187 and changed the 2 files as mentioned above ( Computer >>> Disk C >>> Clip >>> Config):

- probesConfiguration
it works for new models not b4 2005 the it crash out
plz any advice will be appreciated

Alchabab

[ricar6666]

Resolve

Hello everyone


For those who have a connection problem with interface RLT2002 (ori or clone):

You must modify 2 files in version 185 (Computer >>> Disk C >>> Clip >>> Config):

- probesConfiguration

and - probesConfiguration_logs (normally both at the bottom)

If you are in V184, recover these 2 files, install the V185 and modify the files

DO NOT REPLACE THE "VIMI" FILE .......

Small Reminder: If a Clip Version is already installed on your PC DO NOT REPEAT activation procedure

Files in pj (no pass, just a thanks)

Good diags