Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Sid 801a ktag read
|
23-02-2019, 20:55 PM,
(This post was last modified: 23-02-2019, 21:07 PM by Ecutech.)
Post: #1
|
|||
|
|||
|
Sid 801a ktag read
Trying to read sid 801a Citroen Berlingo. Soldered boot pin and connected wireds as shown in the ktag diagrams but i cant get it to boot. Do i need to ground pin 24 too or is that just for the 801? Also tried with galetto and same problem.
Any Ideas? |
|||
|
![[+]](https://cartechnology.co.uk/images/CarTechnologyTheCure/collapse_collapsed.png)
|
25-02-2019, 07:26 AM,
Post: #2
|
|||
|
|||
|
RE: Sid 801a ktag read
Had the same problem with an BDM adapter. Turns out I had turned the adapter the wrong way in the BDM frame. Don't know if this helps you
Boost Fanatic.
 Great tutorial for learning about remapping: https://www.youtube.com/playlist?list=PL...4l65Cu6W-r If i helped you, don't forget THX + REP.  |
|||
|
|
|
26-02-2019, 07:50 AM,
Post: #3
|
|||
|
|||
RE: Sid 801a ktag read
|
|||
|
|
|
26-02-2019, 08:59 AM,
Post: #4
|
|||
|
|||
|
RE: Sid 801a ktag read
Do it on the car by obd.
Galetto was very well If I helped,do not forget to press the
![[Image: tyl_add.png]](https://cartechnology.co.uk/images/CarTechnologyTheCure/english/tyl_add.png) &![[Image: postbit_reputation.gif]](https://cartechnology.co.uk/images/CarTechnologyTheCure/english/postbit_reputation.gif) ![[Image: 60744b34ba9419a0.jpg]](http://images66.fotosik.pl/894/60744b34ba9419a0.jpg) |
|||
|
|
|
03-03-2019, 12:00 PM,
(This post was last modified: 03-03-2019, 12:01 PM by Ecutech.)
Post: #5
|
|||
|
|||
RE: Sid 801a ktag read
(25-02-2019, 07:26 AM)DieselBoost Wrote: Had the same problem with an BDM adapter. Turns out I had turned the adapter the wrong way in the BDM frame. Don't know if this helps you Haha...i thought i did the same as you. No way could i get it to read by bdm. Tried every way. Used galletto in the end over OBD and all is well. Thanks for replying! (26-02-2019, 08:59 AM)rch11 Wrote: Do it on the car by obd. Yes did it in the end with Galletto. Thanks for replying! |
|||
|
|
|
« Next Oldest | Next Newest »
|
| Possibly Related Threads… | |||||
| Thread | Author | Replies | Views | Last Post | |
|
FIAT EDC16C39 read/write | isamyku | 3 | 159 |
Yesterday, 08:08 AM Last Post: YGRemaps |
| How to read TOYOTA 2ADFHV | kantusjack | 0 | 24 |
24-04-2024, 22:49 PM Last Post: kantusjack |
|
| Need Virtual Read for Kess2 EDC17CP14 | Moldovan1 | 1 | 64 |
24-04-2024, 06:43 AM Last Post: loki954 |
|
|
Tool to read Denso Isuzu Opel Corsa ECUs | MasterMulder | 3 | 117 |
18-04-2024, 09:18 AM Last Post: MasterMulder |
| How to read ME 3.1.1 | stjansdal | 2 | 91 |
01-04-2024, 11:54 AM Last Post: stjansdal |
|
| [Request] Ksuite 2.23 for reworked Kess and KTAG | Jordiano | 0 | 108 |
30-03-2024, 10:17 AM Last Post: Jordiano |
|
|
ME7.1.1 8E0910560J full read needed | Andreis | 0 | 71 |
18-03-2024, 19:40 PM Last Post: Andreis |
|
need full bdm ktag bmw e87 118d | saninpwnzor | 2 | 120 |
14-03-2024, 18:05 PM Last Post: saninpwnzor |
|
1.8T AUM Bora Stage 1 read out and flash? | Speedy_07 | 3 | 138 |
11-03-2024, 09:52 AM Last Post: Elijah |
| Ktag 7020 firmware+SD free - update solved | ovi730 | 38 | 16,488 |
07-03-2024, 13:38 PM Last Post: vLTy |
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content
