Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

Sid 801a ktag read
23-02-2019, 20:55 PM, (This post was last modified: 23-02-2019, 21:07 PM by Ecutech.)
Post: #1
Sid 801a ktag read
Trying to read sid 801a Citroen Berlingo. Soldered boot pin and connected wireds as shown in the ktag diagrams but i cant get it to boot. Do i need to ground pin 24 too or is that just for the 801? Also tried with galetto and same problem.

Any Ideas?
Visit this user's website
Quote this message in a reply
25-02-2019, 07:26 AM,
Post: #2
RE: Sid 801a ktag read
Had the same problem with an BDM adapter. Turns out I had turned the adapter the wrong way in the BDM frame. Don't know if this helps you

Boost Fanatic.  evilgrin 
Great tutorial for learning about remapping:
https://www.youtube.com/playlist?list=PL...4l65Cu6W-r
If i helped you, don't forget THX + REP. wink2  
Quote this message in a reply
[+] 1 user says Thank You to DieselBoost for this post
26-02-2019, 07:50 AM,
Post: #3
PPeugeot  RE: Sid 801a ktag read
(25-02-2019, 07:26 AM)DieselBoost Wrote:  Had the same problem with an BDM adapter. Turns out I had turned the adapter the wrong way in the BDM frame. Don't know if this helps you
 Will you post a photo, please?
Quote this message in a reply
26-02-2019, 08:59 AM,
Post: #4
RE: Sid 801a ktag read
Do it on the car by obd.
Galetto was very well

If I helped,do not forget to press the [Image: tyl_add.png]&[Image: postbit_reputation.gif]
[Image: 60744b34ba9419a0.jpg]
Quote this message in a reply
[+] 1 user says Thank You to rch11 for this post
03-03-2019, 12:00 PM, (This post was last modified: 03-03-2019, 12:01 PM by Ecutech.)
Post: #5
RE: Sid 801a ktag read
(25-02-2019, 07:26 AM)DieselBoost Wrote:  Had the same problem with an BDM adapter. Turns out I had turned the adapter the wrong way in the BDM frame. Don't know if this helps you

Haha...i thought i did the same as you. No way could i get it to read by bdm. Tried every way. Used galletto in the end over OBD and all is well. Thanks for replying!

(26-02-2019, 08:59 AM)rch11 Wrote:  Do it on the car by obd.
Galetto was very well

Yes did it in the end with Galletto. Thanks for replying!
Visit this user's website
Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
ZTAudi ME7.1.1 8E0910560J full read needed Andreis 0 46 18-03-2024, 19:40 PM
Last Post: Andreis
XZBMW need full bdm ktag bmw e87 118d saninpwnzor 2 82 14-03-2024, 18:05 PM
Last Post: saninpwnzor
ZVW 1.8T AUM Bora Stage 1 read out and flash? Speedy_07 3 99 11-03-2024, 09:52 AM
Last Post: Elijah
  Ktag 7020 firmware+SD free - update solved ovi730 38 15,959 07-03-2024, 13:38 PM
Last Post: vLTy
  ECU read write lock gvitkis 2 582 05-03-2024, 20:24 PM
Last Post: robertop
JFiat FIAT EDC16C39 read/write isamyku 1 99 29-02-2024, 15:43 PM
Last Post: bogdanwmw
  Peugeot SID 801A 2.0hdi EGR OFF immokill 1 74 29-02-2024, 13:04 PM
Last Post: immokill
  Need full read Johnson Controls S3000 Renault Megane 2.0 RS 8200509965 Maikiu 2 94 28-02-2024, 21:14 PM
Last Post: martink550
UInfiniti Nissan X-Trail 2.2 136hp 2006 How to read/write this ECU beg1 3 142 28-02-2024, 13:03 PM
Last Post: dimitar
ZTAudi Golf 7 r 2.0tsi read write Simos 18.1 grude4 2 141 25-02-2024, 09:55 AM
Last Post: carmageddon1970

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content