[allpro]

I'm about to receive an original PPI interface,
are there any precautions before launching the diagbox executed with a clone interface? 
I do not want to risk locking the interface.

with this interface can I also run citroen?

Thanks in advance

[cit-rotti]

I'm about to receive an original PPI interface,
are there any precautions before launching the diagbox executed with a clone interface? 
I do not want to risk locking the interface.

with this interface can I also run citroen?


the VCI for the Diagbox, LEXIA 3 and Planet from Peugeot and Citroen are technically identical (9780Z5 or A1281Z).
Only the order numbers are different.
Many older VCI also work with the Diagbox - must be tried in each case.
Simply connect - the appropriate software / firmware from the Diagbox is taken over - and can then be used.
The original VCI basically works with any PSA software.

Greeting Wolfgang

[allpro]

this is 963830 A

[allpro]

Firmware version v4.0.4
better, do not update?

[leon163]

I have used this interface for many years - no problem. I also worked on 9-ka - no problem. It is sewn normally and up and down.

[allpro]

so, can I upgrade to 4.3.4 quietly?

[leon163]

so, can I upgrade to 4.3.4 quietly?

I switched, no problem. Photos of his former adapter, I laid out somewhere here.

---

so, can I upgrade to 4.3.4 quietly?

---

so, can I upgrade to 4.3.4 quietly?