Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Kess v2 EDC15P+ error
24-02-2019, 14:18 PM,
Post: #1
|
|||
|
|||
Kess v2 EDC15P+ error
Hello.
I have a problem to read VAG 1.9tdi 85kw PD AJM engine flash. Everything is correct, but kess says unknown ecu. Same problem in this video: https://www.youtube.com/watch?v=ufT1B5DBWDg Maybe someone know solution. |
|||
24-02-2019, 16:12 PM,
Post: #2
|
|||
|
|||
RE: Kess v2 EDC15P+ error
hello,
why not over obd? Follow me on Instragam! --> Chiptuning_NRW --> live:chiptuning.nrw
KTAG 7.026 EU - KESS 5.017/2.47 EU
|
|||
24-02-2019, 18:28 PM,
Post: #3
|
|||
|
|||
RE: Kess v2 EDC15P+ error
|
|||
24-02-2019, 18:45 PM,
(This post was last modified: 24-02-2019, 18:58 PM by Rov Gti.)
Post: #4
|
|||
|
|||
RE: Kess v2 EDC15P+ error
It is known as an ECU with reading and writing problems.
It is possible to lock the ECU file for reading. Also try to read with MPPS. If will not work, desolder the chip. |
|||
24-02-2019, 18:51 PM,
Post: #5
|
|||
|
|||
RE: Kess v2 EDC15P+ error
okay than try.
Choose ==> Setup ==> Pull Up ==> 225ohm maybe thats work. Follow me on Instragam! --> Chiptuning_NRW --> live:chiptuning.nrw
KTAG 7.026 EU - KESS 5.017/2.47 EU
|
|||
24-02-2019, 18:57 PM,
Post: #6
|
|||
|
|||
RE: Kess v2 EDC15P+ error
Thanks for reply, i try it tomorrow.
|
|||
25-02-2019, 16:48 PM,
(This post was last modified: 25-02-2019, 16:48 PM by matuuu.)
Post: #7
|
|||
|
|||
RE: Kess v2 EDC15P+ error
Same error..
Tryed 1.9TDI AFN engine too and same.. unknown ecu. Can the low battery cause this error? https://www.upload.ee/image/9622868/1.PNG |
|||
25-02-2019, 17:06 PM,
(This post was last modified: 25-02-2019, 17:12 PM by compacell.)
Post: #8
|
|||
|
|||
RE: Kess v2 EDC15P+ error
try to not switch off ignition on last point,somtimes this happened,and make speed minimum
|
|||
25-02-2019, 17:12 PM,
Post: #9
|
|||
|
|||
RE: Kess v2 EDC15P+ error
Not work..
Tells me wake up error. |
|||
25-02-2019, 17:15 PM,
Post: #10
|
|||
|
|||
RE: Kess v2 EDC15P+ error
if you have 223 version better,make minimum speed and not switch off ignition last point,me happend same many times
|
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content