[emhtuning]

Hello Gentlemen ,

I have VVDI which I use usually for FRM repairs , but today i got a question if I an reset mileage for F30 2014 FEM ,

I did some googling and I found out that people use  VVDI2 to reset mileage but they use VVDI to read / write the FEM EEPROM .

how to achieve FEM reset without the need to buy VVDI2 as I don't really do much of key programmer jobs .

thanks for the feedback in advance .

[talk2idris]

its very simple,

buying vvdi2 for Odometer correction is quite expansive but for the FEM work this is one of the best and safest way so its worth to buy it

and after that set 0 KM in FEM and change in cluster desire new KM
use vvdi 2 and follow the instruction for FEM
thanks and regards

[emhtuning]

its very simple,

buying vvdi2 for Odometer correction is quite expansive but for the FEM work this is one of the best and safest way so its worth to buy it

and after that set 0 KM in FEM and change in cluster desire new KM
use vvdi 2 and follow the instruction for FEM
thanks and regards

Thank you for the feedback sir .. 

[Chriz]

i can recommend to buy mini ACDP and FEM Authorization
its a bit cheaper than VVDI2+Auth and never had any ISSUE doing FEM/BDC Mileage reset

[emhtuning]

i can recommend to buy mini ACDP and FEM Authorization
its a bit cheaper than VVDI2+Auth and never had any ISSUE doing FEM/BDC Mileage reset

Thanks mate , I've seen it but I was scared from the price difference between VVDI2 and mini ACDP ..I thought mini ACDP is just a crap copy or a clone of something else , I will look into it .