[autoport]

late edit:  solved / the second hand ECU that I was trying to clone / immo of was not good.  solved by using a good unit.



many thanks everybody for helping out!


-------------------------------------------------------------------------------------------------------------------------------------------------------





please I need an info if possible. I need to clone an EDC15C2 from Suzuki Grand Vitara (psa engine) and I have some problems. I swapped the 29 f400 + S95P08 but the car still no start. I have P1517

I`m missing something , I must change immo on dash or something? I wonder if possible to do immo off on the new ECU. 

I don`t know what to try , I`m out of options (this is my first immo off)






the original ecu has some pins that are not looking ok so I decided to replace the ecu with a good unit. with the original ecu the car starts and run. (I swapped back flash + eeprom)


many many thanks

[kino123]

immo is in 29F400

[autoport]

sorry , not working mate

[amine08]

Take this do not touch 5P08

[autoport]

thanks mate , the file is identical with the one above.

should I write this via programmer or works in obd also? (my initial read is obd read)


many many thanks

[autoport]

---

I read / wrote the flash via kess v2 and not programmer. can this be the issue ? maybe the obd read is partial ...


many thanks

[autoport]

as the first ECU that I was trying to replace was not functional , I will have to clone another good unit these days.

how I must correct clone this Suzuki EDC15C2?

some say that I need to swap only flash , some say only the eeprom , some say both ....


many many thanks