[Lux]

Hi to everybody, I have a problem with ISTA-D v.4.15.32 ... 

I would like to update some ecu on my mini F56 so I decided to use this ISTA-D version.

Before to start the program:
- I've used a battery charger and turned on the car;
- I've done the ecu's test and no faults;
- I've calculated the measures plan and ok.

...but I can't start "execute measures plan" 

Then I've checked the ISTAGUI.exe.config file to see if "enable programming" were ok, and again ok...

    <!-- Enable Programming -->
    <add key="BMW.Rheingold.Programming.ExpertMode" value="true" /> 
    <add key="BMW.Rheingold.Programming.Enabled" value="true" />
    <add key="BMW.Rheingold.Programming.PsdzDataPath" value="..\..\..\PSdZ\data_swi" />
    

So, what I'm wronging? 


Can you help me? 

please.....

[BMWS1000RR]

There is another forum member with this exact same issue. I have tried to teamviewer with him to resolve and I just dont see a version mismatch in the files nor any issue @hicazkar hopefully a resolution can be found. He was going to download a different version and also try Windows 7 Enterprise.

[Lux]

Thanks! I will do the same thing.. I will try the v. 4.16.14 and then we will see..

[Lux]

Same problem also with ISTA-D 4.16...... 

Any suggestions?

PLEASEEEEEE.....

[Lux]

Some screenshots...

[Patrick11021979]

You are using an Icom? I do not see any voltages in your screenshots?

[Lux]

You are using an Icom? I do not see any voltages in your screenshots?

No, ENET adapter..

[Fatalix]

Are you using voltage emulator? Pretty sure ISTA needs to register at least 14v to start measures plan.

[Lux]

Are you using voltage emulator? Pretty sure ISTA needs to register at least 14v to start measures plan.

I've used a battery charger and turned on the car but no voltages...

Where I can find that kind of voltage emulator?

[Fatalix]

Here you go: https://cartechnology.co.uk/showthread.p...odeediabas