Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

Traffic Sign Recognition issue after MIB2 retrofit
05-03-2019, 12:33 PM,
Post: #1
Traffic Sign Recognition issue after MIB2 retrofit
Hi,

I retrofitted a MIB2 High (8v1 035 035) unit into my PFL A3(factory fitted with MIB1 High, TSR, ACC with dome radar, Lane Assist,) , all works fine except some issue with Traffic Sign Recognition. Shortly after engine startup I get "Traffic Sign Recognition: Currently Restricted"-with the MIB1 unit I rarely seen that message-, but sign recognition appears to still work and I get posted speed limits or no overtaking signs on my instrument cluster. I also get this error on module A5, it reappears as soon as I clear it :
Quote:"Databus missing message: PSD_01_TO_FAILURE"

If I disable TSR from A5 coding, the error is gone. On module 5F: I tried disabling/enabling VZO, different settings for Car_Function_List_BAP_Gen2-traffic_sign_recognition_0x21_msg_bus, I tried to disable PSD from 5F coding byte24bit7, I tried PSD1.4/1.5 in 5F adaptations... but no luck getting rid of that error.

I noticed that the A5 controller has a coding byte for MIB1/MIB2, but my unit doesn't accept changing the coding to any of the MIB2 settings(I tried with Ignition On/Engine Off):
[Image: Y9uq27q.png]

I noticed there's a 5Q0980653G H06 0060(mine's 5Q0980653E H05 0050) firmware available . Can I use this firmware on my module? Can this update affect ACC or any other front assist system? I know that I need to use VCP to parameterize the module afterwards. Calibration settings I assume I can just import my current calibration settings.

To get rid of that error, do I need to update the A5 firmware or is just some coding/adaptation issue?

Thank you!adore
Quote this message in a reply
09-03-2019, 10:49 AM,
Post: #2
RE: Traffic Sign Recognition issue after MIB2 retrofit
You have to update the A5 firmware to version G, and also add the right dataset to the Camera.
After flashing to index G A5 will ask for dataset. If you have VCP than it is not a probleme. If not than you have to find somebody arround you.
After doing that change the Navigation system to PSD 1.5
Quote this message in a reply
[+] 1 user says Thank You to Grubsche for this post
08-04-2019, 00:24 AM,
Post: #3
RE: Traffic Sign Recognition issue after MIB2 retrofit
I finally got my VCP cable so I updated the camera to G version. This allowed me to change the coding to MIB2 High with PSD1.5, but the error persisted. I then updated my CAN Gateway firmware from 5q0907530M to 5q0907530AJ and this fixed the error.
Quote this message in a reply
11-04-2019, 13:12 PM,
Post: #4
RE: Traffic Sign Recognition issue after MIB2 retrofit
hi , when you flash 19ecu with new .frf file , you have to re-made the safeCp funcion by odis online?? or you just need to update zdc file for dataset and recoding?

thanks
Quote this message in a reply
27-04-2019, 09:03 AM,
Post: #5
RE: Traffic Sign Recognition issue after MIB2 retrofit
Hi,

You don't need to remove CP after flashing the gateway. You just need to upload the datasets for: (FPA)driving profiles, (MKE) Fatigue Recognition and for start/stop system.
Quote this message in a reply
06-08-2019, 23:39 PM,
Post: #6
RE: Traffic Sign Recognition issue after MIB2 retrofit
Hello
I have this issue too after retrofit A5 camera
What can i do since i have MIB1?

Thanks
Quote this message in a reply
07-08-2019, 07:07 AM,
Post: #7
RE: Traffic Sign Recognition issue after MIB2 retrofit
And about calibration, if you flash A5 , you lost calibration or you need only to update zdc file ?
Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
ZVW Virtual Cockpit retrofit on Caddy SB crazyrs6 9 657 18-03-2024, 20:43 PM
Last Post: spooky75
ZTAudi Audi A6 C8 Matrix LED 8G4 retrofit coding Jonas225 1 190 02-03-2024, 09:31 AM
Last Post: wojoo
  ACC retrofit H10 5Q0907572H KluthR 1 131 01-03-2024, 15:44 PM
Last Post: Mex165
ZVW Tiguan 2018 - Issue with HVAC - B10CD00 - function limitation due to energy managem spooky75 16 542 12-02-2024, 08:51 AM
Last Post: gyozo75
  Consult doubt mib2 MORKAS 2 92 30-01-2024, 22:40 PM
Last Post: BIMMERSIMBA
  VW Crafter 2Y 2018year retrofit CCS sokisoki3 0 98 25-01-2024, 16:01 PM
Last Post: sokisoki3
ZTAudi Audi A6 2.0TDI 2016 s tronic transmission shifter buzz issue keturi 5 225 17-01-2024, 12:45 PM
Last Post: keturi
ZVW VW Crafter 2 SY 2020 Retrofit Need help ecugonzo 8 771 15-12-2023, 11:03 AM
Last Post: ecugonzo
ZTAudi Audi A6 Allroad Traffic Sign Recognition stoped working after fw update carmaxlt 2 199 06-12-2023, 14:10 PM
Last Post: carmaxlt
ZVW MIB1 Screen FRF/ODX flash needed (cold weather issue) spooky75 4 290 09-11-2023, 14:40 PM
Last Post: spooky75

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content