[Alexandru.k_24]

Hello friends,
On my 2012 BMW f20 i have factory fitted halogen fog lights. I want to replace them with OE LED fog lights from BMW F20 LCI. As far as I know, they will perfectly fit. But, I must code FEM_BODY after installing them? If so, can someone please tell me what codings do I need? Thank you!

[smercki]

Hi
on FA remove 520 and add 5A1
after code FEM module

[Alexandru.k_24]

Hi
on FA remove 520 and add 5A1
after code FEM module

Hello and thank you,
Will it work even if in 2012 (BMW F20 NON LCI) doesn`t have factory fitted LED fog lights? LED fog lights on BMW F20 were introduced in 2014, on LCI models.

[smercki]

Hi
on FA remove 520 and add 5A1
after code FEM module

Hello and thank you,
Will it work even if in 2012 (BMW F20 NON LCI) doesn`t have factory fitted LED fog lights? LED fog lights on BMW F20 were introduced in 2014, on LCI models.

if FEM has updated software it should work anyway, or you can change the parameters in FDL

[bmw335coding]

Hi
on FA remove 520 and add 5A1
after code FEM module

Hello and thank you,
Will it work even if in 2012 (BMW F20 NON LCI) doesn`t have factory fitted LED fog lights? LED fog lights on BMW F20 were introduced in 2014, on LCI models.

No problem it will work. Maybe you need to update your FEM_BODY to latest i-step.

[simonchs]

FDL coding for OE LED fog light of F2x/3x

Code:

NSW_L_KALTUEBERWACHUNG=nicht_aktiv
NSW_L_WARMUEBERWACHUNG=nicht_aktiv
NSW_L_KURZSCHLUSS=nicht_aktiv
NSW_L_IS_LED=aktiv
NSW_L_UE_SPG_SCHUTZ=dimmed
NSW_R_KALTUEBERWACHUNG=nicht_aktiv
NSW_R_WARMUEBERWACHUNG=nicht_aktiv
NSW_R_KURZSCHLUSS=nicht_aktiv
NSW_R_IS_LED=aktiv
NSW_R_UE_SPG_SCHUTZ=dimmed
MAPPING_ABBIEGEL_L_PWM_LEVEL_1=Werte=64
MAPPING_ABBIEGEL_R_PWM_LEVEL_1=Werte=64
MAPPING_NEBELSCHW_L_PWM_LEVEL_1=Werte=64
MAPPING_NEBELSCHW_R_PWM_LEVEL_1=Werte=64

[Alexandru.k_24]

Thank you firends,
So, here is what i have done,
Added 5A1 to FA and removed 520.
After VO coding, for some reason i have lost the CORNERING LIGHT function.
I have activated CORNERING LIGHT after that by FDL coding using
3062 Mapping_Abbiegel_L_Output -> NSW_L
3062 Mapping_Abbiegel_R_Output ->NSW_R
3066 KL_Enable_LI -> KL_Ein
3066 KL_Enable_RE -> KL_Ein
3073 C_CLC_ENA -> F20enable
3073 C_BLC_ENA -> F20enable
3061 NSW_R_IS_LED -> aktiv
3061 NSW_L_IS_LED -> aktiv
Now it`s working perfectly.
Thank you.