[sfinks2]

Hello everyone.

I have a problem with ISTA-P - it starts and loads OK with loader, but threre is absolutely no text displayed in its interface  except the the status bar on top (see attached screens).

Everytrhing was fine but I have upgraded from windows 7 to widows 10. Had to fix cable setup and now ISTA D works OK but in ISTA P all interface items (menus, tabs, grey-white strips etc.) are displayed and seem to work - i can navigate through them but "blindly" - but there is absolutely no text. Everything is "blank". For example if i go to session start I can see the radio-buttons but not the description of them.


Have reinstalled C+ redists, net frameworks are icluded in system (both 3.5 and 4.7.2).

I'm using Standalone "package" downloaded with tporrent including Rheingold 4.03  + loader 6.1F (rev1) with K-D CAN emulator + OBD-USB cable.

What am I doing wrong? Any help to solve this problem would be really very very  much appreciated.

Thanks a lot in advance.

[Arual]

Change istap loader

[sfinks2]

Change istap loader

Thanks a lot for your suggestion.
I have tried version 6.1;  6.1F Rev 1 and 6.4 (just to check - I do need ICOM emulator for OBD2 -USB cable).
Nothing helped.

INPA and stuff (NCS, WINKFP) works, ISTA-D works, "only" problem is with ISTA-P

What else could be wrong?
Perhaps there is something wrong in my windows 10….

[Matthew53]

Check if you have c+ redists beggining from 2005, ending at 2017 (everything in both x86 and x64 versions), also check if you have installed 'Microsoft Primary Interoperability Assemblies 2005'(vs90_piaredist). Install Java 8.40 or higher and also net framework (4.5.2 and 4.6.2)

I was running ISTA-P on windows 10 with usual configuration, so it's probably not a problem with windows itself. Sometimes incorrect version of windows 10 may cause that kind of faults.

[e46ad]

Use,

New Text Document.txt
File Type:
Downloaded:	93 times
Size:	70 bytes

Install and try again I had this problem on Windows 7 installed the above and it was okay again

[sfinks2]

Thanks, thanks a lot!

You guys are wondwerful - you have pushed me in the right directtion.

I have unlistalled all vcredists and intalled the copies downloaded from internet pages of MS (in my lanmguage)
2015 vcredist did not install saying there is newer version (2017).

Next I have reinstalled piaredist (happen to have 2005 and 2010) and...
Tadam - it works

I have unlistalled piaredist 2010 and everythig works OK.

THAKTS A LOT - you are great!

[sfinks2]

Oops!
Looks like the same problem is back again.
I think I did everything according to instruction and - still there is no text in interface of ISTA-P

This is standalone package of Rheingold 4.15.16 and ISTA-P 3.66.0.200
Windows 10 Pro 64 bit
Intel i5
4 GB RAM

ISTA-D, INPA, NCS, WinKfp etc - all works OK
ISTA-P worked OK for a while and now suddenly again the same fault is back.
I do not know what went wrong again.

I have installed all VC++ rediststs using "MPVC_11_setup.exe" found on Internet - all look like installed OK
I have checked .NETs - one by one - the installers say everything was installed already previously
I have isntalled the piaredist 2005 - says it is isntalled
I have updated java - no further updates are availailable
I have removed ISTA-D and ISTA-P.
I have run RCleaner 4.4
I have unzipped the whole ISTA-P with all data files
I have reset the loader 6.1 and put the password again

Still no go.
What on Earth can be wrong with it?
I am sitting at it for some days now and it already drives me mad
Is there any way to identify where the problen is and what is not working exactly?
What else can I try?
Prehaps I will try to use the previos version of ISTA-P 3.60.2.001 - maybe my ISTA files are wrong....
Any help would be really very much appreciated.
I do trust in you guys

[Matthew53]

Have you installed any update for Windows in meantime? Suggest you to disable automatic updates.
Before you unzip files, check "unlock" in properties of the .rar

[sfinks2]

Have you installed any update for Windows in meantime? Suggest you to disable automatic updates.
Before you unzip files, check "unlock" in properties of the .rar

Sure - I have double chceked if all the archives are unblocked. Anyway thanks for suggestion.
I just wonder if the cause is in ISTA-P itself or any other required element.
Is there any way to debug it - for example to see what was started OK and what exactly went wrong?

There could have been updates to the Windows  in the meantime.
Can you give some more details what could go wrong with this update?
What should I check after update (vcredists, pairedist, .NET, java)

Perhaps I can unisntall the updates and see if this works.

I am still in trouble with my ISTA-P. Looks like it does not like Windows 10 with 64bit.


Perhaps I should update Standard Tools - but I do not know which version to install and how - this seems not as easy as it was on windows 7.

[e46ad]

Have you installed any update for Windows in meantime? Suggest you to disable automatic updates.
Before you unzip files, check "unlock" in properties of the .rar

Sure - I have double chceked if all the archives are unblocked. Anyway thanks for suggestion.
I just wonder if the cause is in ISTA-P itself or any other required element.
Is there any way to debug it - for example to see what was started OK and what exactly went wrong?

There could have been updates to the Windows  in the meantime.
Can you give some more details what could go wrong with this update?
What should I check after update (vcredists, pairedist, .NET, java)

Perhaps I can unisntall the updates and see if this works.

I am still in trouble with my ISTA-P. Looks like it does not like Windows 10 with 64bit.


Perhaps I should update Standard Tools - but I do not know which version to install and how - this seems not as easy as it was on windows 7.

Install Windows 10 Pro 64bit Fresh,

Use Aio Installer,

Use the including  vcredist multlang in tools folder

Install Java,

Install Net Framework 2.0 and 3.5 ( IF Aio Doesn't)

Make sure the Firewall is turned off as it can block the JAVA runtimes and cause errors in ISTA-P

No antivirus should be installed,

ISTA-P should be working fine after this, Get the latest 3.66.1.200 from here and re try again,

I have not seen this problem for a long time, I have NEVER seen it on Windows 10 the only time I found this error was in Windows 7 as I didn't have the latest Internet Explorer installed no pictures would load, Updated Windows 7 and Java etc all fine,

I say try a clean Windows install.

Standard tools is not going to make a difference to how ISTA-P is going to load the only error I have seen it show is if you don't install

Patched_EDIABAS_7.3.0 or an Ediabas and that's the loader asking for it not ISTA-P